another mono question

ducapiero · Post by **ducapiero** » Thu Apr 19, 2007 9:33 am

Hey guys yesterday i was driving a bit longer on highway at velocity(120-130km\h and a little more)and when the street became not liss my mono began to pump and make all the bike moving :rant: :rant: :rant:
i think it's too soft regulated....
how i can make this harder???
thanks
Piero

ducapiero · Post by **ducapiero** » Fri Apr 20, 2007 4:10 pm

hey guys
my mono regulator appear in this way any suggestion???
help me

[img][img]http://i172.photobucket.com/albums/w10/ ... G_0040.jpg[/img][/img]

Post by **paso750** » Fri Apr 20, 2007 4:44 pm

manual says: "Screwing the knob the suspension extension braking action will be increased; unscrewing braking action will be reduced"
So clockwise will become harder, counterclockwise softer.

Does your shock really pump ? My own Paso usually started to hop a little bit and that was because the shock was adjusted too hard.

Finnpaso · Post by **Finnpaso** » Fri Apr 20, 2007 7:33 pm

...at least that shock is just same, what they use in late 750 Pasos and 906 modells. Not, what 907 have and not that Öhlins in early 750 Pasos...

Have U taken it out from bike??? I think, You have to rebuild it, but ask from some maintainer, can that unit be opened, like 907IE Marzhocci with Ducati spare part kit. If U take it out and it dont response to Your pressing it with good "feedback", then its out and need rebuilt. I really dont know, does that 907Ie Marzhocci rebuild kit fit to this shock, or no....