Question about 750 rear shock

[Finnpaso]

Marzocchi Duo 38 Remoto unit(in 907IE):

Inside pressure: 8kg/cm2(or 112Psi)
(750 Paso Öhlins 18 BAR)

In my spare part package(from Ducati dealer!)reads:

VS.36640011A
NS.850114

I havent check anything from microfilms.

I quess, that same spare part fits to older 750&906 Marzocchi unit, but cant be 100% sure, cause i dont have such unit!

[gasfireman]

According to the Ducati manual for the 906, the Duoshock should be pressurised at 6 atmosphere (6 bar) which is 87psi. I would have thought the 907 would be the same.

I am just rebuilding one and need to know how much damping oil and what viscosity it is?
Anyone know??

[Finnpaso]

Did U know, that there are 2 diffrerent Marzhocci units used in Pasos? 750 and at least early 906 had same "older" modell and 907 have that "later" version"(duo 38 remoto, how i called it)..... I dont know that "older" version pressure. Early 750 Pasos had very good Öhlins unit...