Need a Choke Lever

Post by **jcslocum** » Fri Apr 17, 2009 9:51 pm

Quik update on my Paso repair. New battery in the bike and a spark plug cleaning and she fired right up. Idle was way too high so I started to dig into that. The choke was hung up and after prying and pulling I discovered the choke cable elbow on the lever is broken?? Anyone have this part laying around??

persempre907 · Post by **persempre907** » Sat Apr 18, 2009 12:56 pm

I bought it for few Euros at my nearest Ducati dealer.
You'd find it easily because it has been fitted on many Ducati.
Ciao

Finnpaso · Post by **Finnpaso** » Sat Apr 18, 2009 4:35 pm

Jon, can U explane little more what part is EXACT broken, as i didnt understand "all" about You mail??? Can You take foto, what is broken? If its connected to "choke" lever in handlebar, then its like Frankie told, its same unit in many Ducatis and not so expensive... Let us know... U are good to fit fotos to sites, i know..

higgy · Post by **higgy** » Sat Apr 18, 2009 9:19 pm

Got him covered Antti

Post by **jcslocum** » Sat Apr 18, 2009 10:55 pm

That little elbow part has broken off. It's the thing sticking out on the left side with the groove in it.

Finnpaso · Post by **Finnpaso** » Sun Apr 19, 2009 5:31 pm

first ask price from Duc dealer...and then let us know...

persempre907 · Post by **persempre907** » Sun Apr 19, 2009 8:13 pm

I paid it less than 10 Euros at the Ducati dealer.
Ciao

higgy · Post by **higgy** » Sun Apr 19, 2009 8:54 pm

We are in the right ballpark then

Finnpaso · Post by **Finnpaso** » Mon Apr 20, 2009 2:11 pm

I am very courious about price in USA and in EU (Ok,Frankie bought under 10€)

Desmo_Demon · Post by **Desmo_Demon** » Wed Apr 22, 2009 1:51 pm

Sorry, Jon, but my only spare is busted, also. There is a possibility you can adapt one from an early ST2, since they use the same master cylinder.....Actually, I just ran downstairs, and you may be able to adapt the choke lever from an ST2/ST4 up to 2002. I have 2002 master cylinders on my one '98 ST2, and the choke lever bolted right to the 2002 master cylinder. It will look different, as it only has the upper lever for your thumb and is missing the lower one.

You can barely see it in this picture.

persempre907 · Post by **persempre907** » Tue Apr 28, 2009 8:54 pm

Jon,
don't you have any Ducati dealer near to you?
Antti and me are just curious to know about the price

.
Ciao

Post by **jcslocum** » Wed Apr 29, 2009 11:10 am

7 dealers near me. I will get a price from the delaer today!

persempre907 · Post by **persempre907** » Thu Apr 30, 2009 8:26 pm

You're are very lucky

.
Let us know.
Ciao

Need a Choke Lever

Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever

Re: Need a Choke Lever