missfire/banging in the exaust starting just around 3200 rpm

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

bobst2
Posts: 192
Joined: Sun Jul 24, 2011 1:57 pm
model: 750 Paso
year: 1988
Location: delta b.c. canada

Re: missfire/banging in the exaust starting just around 3200

Post by bobst2 »

1 what igntion system does your bike have
2 when exactly does it crap out
3 did you read the whole post as banging and backfireing can be caused for several reasons my bike just
died while rideing 60 mph ounce it warmed up it was engine temp related after a few mins,it would restart and run but only at low rpm. it continued to get worse untill it would only run to 3200 rpm. i went through a detailed inspection.fuel filters,lines,tank filter,carb filter,swapped out known good coils & igntion box

please try to give a detailed discription of what your bike is doing.there is a lot of experence & skilled guys on this site that are willing to help.
you may want to start a new post on your problem and get fresh information.
feel free to send me a personal message if you would like
Post Reply