Corbin seat on a 907

beemerboy · Post by **beemerboy** » Fri Feb 03, 2006 5:39 pm

I received some inquiries as to how a black & red Corbin seat looks on a black 907. Well, here ya go:

Rogero · Post by **Rogero** » Fri Feb 03, 2006 7:06 pm

[/url]

This is what a Red 907 looks like with a black Corbin seat on.

Roger

beemerboy · Post by **beemerboy** » Mon Feb 06, 2006 9:10 pm

Oh, I see that you have one of those "pedestrian" red 907's. :laugh:

Stingray230SX · Post by **Stingray230SX** » Tue Feb 07, 2006 4:20 am

Me likey those carbonfiber cans

doug

Rogero · Post by **Rogero** » Tue Feb 07, 2006 7:08 pm

Bit loud for the annual MOT test but got a certificate so I'm ok!

The cans are ANR Performance pipes from the UK. Sounds like a MOTO GP bike and the neighbours hate it!

The seats are excellent.

Stingray230SX · Post by **Stingray230SX** » Tue Feb 07, 2006 9:34 pm

YES i know about the loud pipes ,while mine are the stock cans on the outside the P.O. cored them out and removed the aluminum trim and wrapped them in stainless(if he had only jet hot coated the rest of the pipes/system it would be fine)however he used some kina paint that is slowly bubbling off and is a not so hot looking grey color anyway.

been wanting some carbon cans but money is tight right now(plus its hard to drop 700.00+

on a set of cans when i have right about 2500.00 in the whole bike)and it runs most excellent anyways!!!

doug

Rogero · Post by **Rogero** » Fri Feb 10, 2006 6:29 pm

I wouldn't change cans unless I had to, there is better things to spend cash on. But when you do change them make sure you get a set that you'll enjoy. Daft as it seems polishing a pair of carbon cans brings a smile to my face....

Must dash I think I need a beer :laugh:

Finnpaso · Post by **Finnpaso** » Fri Feb 10, 2006 6:36 pm

Remember to "remap" Your ECU also, if change to open pipes!

Rogero · Post by **Rogero** » Sat Feb 11, 2006 12:50 pm

Top tip Antti for those not aware.

Mine is chipped specially for the pipes so valves etc won't get burnt out

Finnpaso · Post by **Finnpaso** » Sat Feb 11, 2006 2:08 pm

Good, Rogero!

I am virgin, so i need to take care of all Paso-owners all around world! :funny: :funny: Btw, i have also chipped my 907IE. FIM chip, FIM AMB and surely tuned with flat top FIM software. Need 7.4% richer mixture with ported heads, ST2 Cams, K & N and open Contis. But now function VERY well !!!

Rogero · Post by **Rogero** » Sat Feb 11, 2006 6:25 pm

Indeed - sounds good.

Cold in the UK today but very dry and I went for a blast today after full service and MOT last week. Marvellous stuff. Paso's turn heads more than most other bikes I know.

Roll on the spring

Finnpaso · Post by **Finnpaso** » Sat Feb 11, 2006 7:23 pm

....especially Women heads !!!! :laugh:

Rogero · Post by **Rogero** » Fri Sep 07, 2012 6:07 pm

This thread is appropriate as I am in correspondence with keith about my seat!

Rogero

900streetfighter · Post by **900streetfighter** » Sat Sep 08, 2012 1:44 pm

Looks good on your bike Roger. Hope its comfortable. Style over function wins for me anyway.
I have a Corbin on my streetfightered SSie, weighs a ton and no more comfortable than original but looks great.

Corbin seat on a 907

Corbin seat on a 907

Corbin seat

Re: Corbin seat on a 907

Re: Corbin seat on a 907