Ducati 906 paso wheel spec

discussions specific to the 906 Paso
Post Reply
Jimmy
Posts: 3
Joined: Sat May 18, 2019 3:11 pm
model: intending to buy a Paso/Sport
year: 1986
Location: Norway

Ducati 906 paso wheel spec

Post by Jimmy »

Hello i was wondering if anyone know how wide the 906 paso wheel is at the hub ? i mean from spacer to spacer with the sprocket hub in place .
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Ducati 906 paso wheel spec

Post by paso750 »

not sure what you mean by from spacer to spacer but the width at the hub is 159mm rear, 125 front rim
Jimmy
Posts: 3
Joined: Sat May 18, 2019 3:11 pm
model: intending to buy a Paso/Sport
year: 1986
Location: Norway

Re: Ducati 906 paso wheel spec

Post by Jimmy »

i mean how wide the wheel is in the center ,lets say when the center bolt is put in and then make a mark on each side of the center bolt with the spacers . That was not easy to explain :D
But i guess the answer you gave me is that measurement?
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Ducati 906 paso wheel spec

Post by paso750 »

my dimensions are the width of the rim at the hub. Basically outer side of one wheel bearing to outer side of the other. The pan of the sprocket carrier included it`s ca 207mm width
Attachments
Abmasse.jpg
Abmasse.jpg (45.12 KiB) Viewed 5948 times
Jimmy
Posts: 3
Joined: Sat May 18, 2019 3:11 pm
model: intending to buy a Paso/Sport
year: 1986
Location: Norway

Re: Ducati 906 paso wheel spec

Post by Jimmy »

Thank you that is the measurement i needed .
Post Reply