Fan thermo sensor/switch

discussions specific to the 907IE
Post Reply
Bzapcat
Posts: 19
Joined: Wed Feb 13, 2019 2:05 pm
model: 907 I.E.
year: 1992
Location: Perkasie PA

Fan thermo sensor/switch

Post by Bzapcat »

Apparently my fan thermo switch is bad. Does anyone know of a replacement for the sensor/switch ? I've read that it's a common sensor/switch. But I am having a hard time finding one that is a correct fit. Of course I can always run a bypass switch but I'd rather use a workable thermo switch. Thank you!
User avatar
Derek
paso grand pooh-bah
Posts: 768
Joined: Thu Nov 03, 2011 10:13 am
model: 907 I.E.
year: 1994
Location: Scotland

Re: Fan thermo sensor/switch

Post by Derek »

That thermo switch was used on the 906, 907ie, 851, 888 and 9176 and early 748 but is no longer available.
https://www.stein-dinse.biz/product_inf ... _id=114492

However the switch for the later 748 and the 996 is available. It is essentially the same switch but with a different connector. It would need the connector of the 907 loom changed to fit.
https://www.stein-dinse.biz/advanced_se ... gories_id=
1994 907ie
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)


Scotland
User avatar
du907
Posts: 346
Joined: Fri Jul 08, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Winston-Salem, N.C. USA

Re: Fan thermo sensor/switch

Post by du907 »

A lot of this type of part was also common on cars. Isn't there a site or posting of common parts that where also used on cars at the time? Maybe it's on that list.
Bzapcat
Posts: 19
Joined: Wed Feb 13, 2019 2:05 pm
model: 907 I.E.
year: 1992
Location: Perkasie PA

Re: Fan thermo sensor/switch

Post by Bzapcat »

Thank you Derek! I did a search for the 916 temp switch and found an aftermarket switch a lot cheaper. I also picked up a "lower" temp switch and installed that one first. It has the same electrical terminals as the 907. Thought I'd give that a try first before cutting and splicing a electrical plug for the newer style.
User avatar
Finnpaso
paso grand pooh-bah
Posts: 3090
Joined: Mon Jul 26, 2004 12:00 am
year: 0
Location: Finland

Re: Fan thermo sensor/switch

Post by Finnpaso »

Can You put some link here about that 916 switch. I mean, that where You bought it and what was price?
Antti http://www.youtube.com/watch?v=HeKOh3XoXPg&NR=1
KTM 990 Adventure -08 metal dark grey
Paso 750 -89 red/metal grey
907IE -91 red/metal grey
907IE -91 red
2xST4S -02 red/metal grey
ST2 -01 red/metal grey
Volvo V70 Bi-Fuel Classic/titanium
User avatar
Witzie
Posts: 44
Joined: Wed May 25, 2011 9:17 am
model: 906 Paso
year: 1989
Location: Friesland, the Netherlands

Re: Fan thermo sensor/switch

Post by Witzie »

for my 906 I ordered a Febi Bilstein 06031 fan switch which looks exactly the same. 22 x 1.5 mm thread , 92 and 87 C switch temps. I have yet to find out if it fits but it most probably will
Kawasaki 250 Mach1 1977, Honda CB125T 1978, Kawasaki Z400J 1981,
Kawasaki Z700 1987, Kawasaki ZL1000 1990, Ducati PASO 750 1990, Ducati 900ss 1994,
Kawasaki ZZR1100 1993, Ducati Paso 906 1989
Post Reply