Paso 750 engine removal procedure

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
Mauricedonini
Posts: 5
Joined: Sat May 14, 2022 11:56 pm
model: 750 Paso
year: 1987
Location: USA

Paso 750 engine removal procedure

Post by Mauricedonini »

Hi,

Does anyone know where there is a Paso 750 engine removal procedure?

The workshop manual has sections on disassembly, overhaul and reassembly.

Thank you,

Maurice
1987 Ducati Paso 750 (running but in need of help)
User avatar
paso750
paso grand pooh-bah
Posts: 5558
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Paso 750 engine removal procedure

Post by paso750 »

The parts catalog will probably help.
It's not that difficult. After removing the exhaust and headers and everything else that's connected to the engine like shifter lever or crankcase breather hose, disconnecting the wires of the neutral switch, ground connection etc. remove the bottom frame rails with front engine mounts, unbolt the other two engine mounts on the side and then remove swingarm and chain. Can't remember exactly but I think there's another long bolt on the rear bottom. Then it should drop out. Before all of that make sure to support the engine properly so it can be safley unbolted from the frame!
Mauricedonini
Posts: 5
Joined: Sat May 14, 2022 11:56 pm
model: 750 Paso
year: 1987
Location: USA

Re: Paso 750 engine removal procedure

Post by Mauricedonini »

paso750 wrote: Wed Feb 01, 2023 5:45 pm The parts catalog will probably help.
It's not that difficult. After removing the exhaust and headers and everything else that's connected to the engine like shifter lever or crankcase breather hose, disconnecting the wires of the neutral switch, ground connection etc. remove the bottom frame rails with front engine mounts, unbolt the other two engine mounts on the side and then remove swingarm and chain. Can't remember exactly but I think there's another long bolt on the rear bottom. Then it should drop out. Before all of that make sure to support the engine properly so it can be safley unbolted from the frame!
Thank you
Post Reply