You need to post 'em somewhere else, and then in the "Post a reply" section, hit the IMG button, then open the picture in another Microsoft Internet Exploder window, right click on properties, copy the properties, close that window, paste the properties next to the IMG word, then hit IMG* again, and click on preview to see if it worked.
I have been posting my pic's on http://www.frappr.com, mine are all stored on http://www.frappr.com/theendroadracing, but I suppose anything would work, like myspace or something.
It took me a few tries to figure it out!
lowering my Paso
Max sent me some pic's to post, here they are:
From what Max told me in his email, he originally raised the bars using spacers, but found that the raised bars blocked his view of the mirrors. So, he took the spacers off and bored the clip-ons out instead. Looks good!
BTW Max, nice oil pressure gauge! I'd like to find a digital, smaller version; until then I've at least got my oil light working finally!
From what Max told me in his email, he originally raised the bars using spacers, but found that the raised bars blocked his view of the mirrors. So, he took the spacers off and bored the clip-ons out instead. Looks good!
BTW Max, nice oil pressure gauge! I'd like to find a digital, smaller version; until then I've at least got my oil light working finally!
The $900 Paso: DellOrto's, Dyna 5 ohm coils, Ignitech TCIP4; finally, a new set of tires! Goldentyre GT070/071
The bike is gone, but the nightmares continue...
The bike is gone, but the nightmares continue...
@ max, have anymore pics? :lick: