Page 2 of 2
Re: New here
Posted: Wed Dec 14, 2011 10:56 am
by Derek
Tamburinifan wrote:Very clean bike, congrats!
Can you post a close up pic of the top case mount, near rear pegs?
Not sure which bit you mean Gert
Do you mean the mounting for the top case frame?
Re: New here
Posted: Wed Dec 14, 2011 11:01 am
by Derek
davo wrote:Hi Derek, nice looking 907!
The standard pipes do look good!
How many km`s?
Is that a battery breather hose attached to the swing arm?
I eneded up buying a deka sealed battery to get rid of any battery acid problems.
26,500 miles, I think that's around 40,000 km.
The pipe is a for a Scott oiler. A type of automatic chain oiler popular in the UK, made in Scotland too
It has a new AGM sealed battery fitted.
Re: New here
Posted: Wed Dec 14, 2011 8:26 pm
by Tamburinifan
Do you mean the mounting for the top case frame?
Yep, the lower mount near pegs.
Re: New here
Posted: Wed Dec 14, 2011 9:41 pm
by persempre907
Re: New here
Posted: Wed Dec 14, 2011 9:46 pm
by Derek
Tamburinifan wrote:Do you mean the mounting for the top case frame?
Yep, the lower mount near pegs.
I can post a picture but it won't be until the weekend
Re: New here
Posted: Thu Dec 15, 2011 11:40 am
by Tamburinifan
Thx, Francie!
Derek, no hurry at all.
Just courious since I have similar top case frame.
Re: New here
Posted: Sun Dec 18, 2011 1:37 pm
by Derek
Gert,
Here are some pictures of the top case frame mounts.
At the footrest hanger the lug on the top case mount is clamped between the hanger and the subframe at the rear bolt with a similar thickness spacer (washer) fitted at the front bolt.
At the back there is a bracket that clamps around the lower subframe tube.
Re: New here
Posted: Sun Dec 18, 2011 3:57 pm
by JoKing
Wooooo..... he as an original tool kit!
Re: New here
Posted: Sun Dec 18, 2011 4:05 pm
by Derek
JoKing wrote:Wooooo..... he as an original tool kit!
Yes. Original tool kit, Owners Handbook, 906 Paso Workshop Manual with 907ie supplement all came with the bike as well as an assortment of shims.
Re: New here
Posted: Sun Dec 18, 2011 5:28 pm
by paso750
that looks like a GIVI luggage carrier, but if it is it seems it`s not mounted correctly (at the footpegs).
http://www.box.com/shared/4go2jdg17i
G.
Re: New here
Posted: Sun Dec 18, 2011 7:39 pm
by Derek
I've only just aquired the bike so I'm pleading not guilty. From the diagram it looks like the footpeg mount should be on the outside of the hanger but to be honest the way it is mounted looks a lot tidier to me.
Re: New here
Posted: Sun Dec 18, 2011 10:26 pm
by Jaffa
Mine was mounted exactly the same...but removed now as I think the bike looks far better without them.
Re: New here
Posted: Mon Dec 19, 2011 6:58 pm
by paso750
If it`s mounted like that I`d at least put a washer with the same thickness under the other footpeg bracket bolt as otherwise you`ll have stress on the material and the two bolts.
G.
Re: New here
Posted: Wed Dec 21, 2011 2:37 am
by Tamburinifan
