ducatipaso.org

Ill take 2 pair

I´m interested too. I´ll sign up for 2 front and 2 rear.

Mikko
Norrköping
Sweden

What's the status on this bulk order?? Is this just some mean joke to mess with Paso owners!!?

We'll...gimme two pairs, front & rear!!!!

Take whatever your estimated order is and multiply it by 5!! Even easier, take the number of Paso members on this site; double it for potential non-members; and then quintuple that (5X) for anticipated orders. So # members X 10. If you keep those tires vacuum sealed (inert environment) and out of sunlight (no uv exposure), I'm guessing they could last potentially a decade....

I know Michelin lost a chance to sell me at least five sets, in as many years!!

Hey Higgy -

I noticed you started this thread with the title of "Want 16 inch tires? Sign up here"
and yet were the first to reply 1 minute later with "I'll take 2 as soon as they are available".

After re-reading the entire 4 pages of this thread it seems to
me to be a mystery as to who is tallying our requests for tires
in an attempt to lobby the manufacturer towards a production run.

Most importantly, Higgy, this is not a critique or an attempt to berate
your efforts, just a need for clarification. If there is anything I can do
to propel our case with the manufacturers I will gladly share the burden
of the torch. If there are any contact numbers or e-mail addresses
of manufacturers available send them my way for further lobbying.

I too want to believe in the "Paso Claus". . .

Fredskidoo

My impression is that J C Slocum, the moderator, has made some attempt to persuade the manufacturers. Haven't heard much lately though, as it's a time consuming and, no doubt, frustrating task.

J C, is there any news??

Many people tried to ask to manufacturers to build some new tires.
The investments are too high for the number of tires which could be sold.
The Michelin too has been asked to build some new tires, even if the A/M 59 are obsolete by now.
So, these attempts went failed.
Ciao

Ill take huge amount of sets..... and sell them after few years in Ebay for very high price....

I start to wait christmastime now that "he" (who lives in north Finland in Korvatunturi) will bring to me huge amount of Michelins and i get rich with them after few years....

Finnpaso wrote: I start to wait christmastime now that "he" (who lives in north Finland in Korvatunturi) will bring to me huge amount of Michelins

Why don't you go for a visit and send "him" some flower for us?
"he" might bring us some xmas gifts if we are good boys!

Nicola,
I guess "He" will bring you only coal....

But, to me who am really a good fellow....
Ciao

There's ONE thing I prefer a all to coal and anything else....
Second one is riding!

So, we hope "HE" will bring us the first thing you was talking about.
I don't know exactly what you are thinking, but I TRUST IN YOUR GOOD TASTES !!!!!
Ciao

See answer below received today from Avon about 160/60-16 tyres.

Perhaps Avon might reconsider if everyone phoned or sent an email to Peter J McNally at pmcnally@coopertire.com

GT-UK



Hi Geoff,
At the moment we have no plans to produce this size, sorry.

Best regards,

Peter J McNally
M/C Technical Product Manager
01225 357753
www.avonmotorcycle.com

The information contained in this e-mail (along with any attachments) is intended only for the use of the individual to whom it is addressed and may contain privileged and/or confidential information that is exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that you should not read any further, and any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this in error, please notify the Law Department at Cooper Tire & Rubber Company Europe Ltd. Tel.44-1225-703-101 and immediately delete this transmission. Cooper Tire & Rubber Company Europe Limited is a company registered in England and Wales with registration number 150903 and its registered office is at Bath Road, Melksham, Wiltshire SN12 8AA, United Kingdom."


-----Original Message-----
From:
Sent: 29 June 2009 10:20
To: McNally, Pete J.
Subject: RE: Contact us (avontyres)

Thank you VERY much for your reply. You are the only tyre manufacturer to reply to such questions.

Is there any realistic possibility that you could produce a 160/60-16 rear tyre in the future? If so, what would be the minimum order quantity?
Owners of 750 and 906 Ducati Paso (and other) motorcycles worldwide now have no source of this tyre size and the fitting of an alternative size tyre is not practical due to clearance issues with the chain/swingarm.

Again, thanks for your reply.

Geoff Thomas

Perhaps we should put a letter together to find out their minimum order requirements for a limited run tire and inquire as to the price per tire for such a run. just a thought

The reply below was received today from David Banks of Maxxis UK (david@maxxis.co.uk).

I have sent a reply asking for an indication of the number of tyres that need to be sold to cover the cost of a mould.

GT-UK



Dear Geoff,

Thank you for your enquiry.

We regret although there is demand for this size it is not sufficient to commercially cover tooling
costs for new moulds.

The only way this could possibly happen would be similar to the Vintage Owners Club
who have paid for the moulds with Dunlop to get tyres still made and then stock and sell
to their members. Perhaps this may be an option for the Ducati Owners Club to consider ?

Regards,

David Banks

The only way this could possibly happen would be similar to the Vintage Owners Club
who have paid for the moulds with Dunlop to get tyres still made and then stock and sell
to their members.

What are the cost of this way?