Does anyone have a Paso 906 parts manual that they can email to me ? Also anyone know what temp range and pressure range the oil runs on these bikes? I am working on a little electronic LCD screen that people can add to the dash for oil temp, oil pressure, voltage, possibly amperage. It's a project and I will provide everyone with the details once I have a prototype built.
-Alex
Paso 906 Parts
-
- Posts: 45
- Joined: Thu Jan 12, 2006 12:00 am
- year: 0
- Location: South Island, New Zealand
- Contact:
Unfortunately
Yes I tried downloads but unfortunately there is only ones for the 750 and I am sure that many parts dont cross over
-
- Posts: 45
- Joined: Thu Jan 12, 2006 12:00 am
- year: 0
- Location: South Island, New Zealand
- Contact:
Re: Unfortunately
others correct me if im wrong, but the 906 only has a diffrent gearboz and bigger motor, i think most of the other parts are the same (i think???), same wheels, frame, (carb may also be diffrent in some models), but they were basicaly the same setupalextnec wrote:Yes I tried downloads but unfortunately there is only ones for the 750 and I am sure that many parts dont cross over
906 very different
The 906 is water cooled and not oil cooled to start, alot of items are completely different on the bike.
-
- Posts: 32
- Joined: Tue Apr 11, 2006 12:00 am
- model: 906 Paso
- year: 1990
- Location: Canberra, Australia
Alex
I don't have a parts manual as such, but I have scanned in the 906 workshop manual. I have uploaded it to the Webmaster to link into the downloads area of the site, so should be available soon.
If you need it in a hurry I can email to you, but it is quite big; nearly 12MB in 3 parts, so it depends if it will make it thru your email system.
cheers
Dave
I don't have a parts manual as such, but I have scanned in the 906 workshop manual. I have uploaded it to the Webmaster to link into the downloads area of the site, so should be available soon.
If you need it in a hurry I can email to you, but it is quite big; nearly 12MB in 3 parts, so it depends if it will make it thru your email system.
cheers
Dave
-
- Posts: 21
- Joined: Sat Feb 05, 2005 12:00 am
- model: 906 Paso
- year: 1990
- Location: USA
parts manual
Greetings..............I called Fast By Ferracci in Willow Grove,PA USA and he sent me a micrfiche for under 10 bucks. With that, you can go to a library and make copies or just use their microfiche machine. Its extremely helpful to have around and inexpensive. Ferracci also has a website http://www.ferracci.com that may help. Good Luck!
Rich
Rich