NEED '91 907IE - Seeking turn signal/mirror units.

Paso items for sale or wanted
Group members may list non-paso classified ads
Post Reply
erikfleming

NEED '91 907IE - Seeking turn signal/mirror units.

Post by erikfleming »

Hi -

Just got my 1991 907 IE back from the shop. The whole thing is restored but they only thing they could not find was the mirror/turn singal units for both sides, which mine are cracked and taped up.

They said the electrical is all fine if I can at worst only find the case.

Any help is appreciated!!!
User avatar
zap
Posts: 68
Joined: Fri Nov 25, 2005 12:00 am
model: 750 Paso
year: 1990
Location: the netherlands
Contact:

Post by zap »

hi, this is zap from the netherlands.

i've got a pair of mirrors from a cagiva freccia (2nd hand in good condition)

they are almost the same. look! the cagiva is the left one.

http://www.geocities.com/750paso/pictur ... irror1.jpg

only one of my mirrors has a little piece off ( 2 by 2 mm.) you can't see it when it is on the bike.

if you are interested, i can send you some pics!

mail to axtrabter@hotmail.com.

i also have got a brand new left side unit from cagiva.

greets, ab. :thumbup:
907Mexico

Post by 907Mexico »

I also need the right side mirror. You should try http://www.oldracingspareparts.com They have helped me in the past although they are not cheap and the shipping from Italy is also expensive. Good luck
User avatar
vtduc
Posts: 17
Joined: Thu Aug 17, 2006 12:00 am
model: 907 I.E.
year: 1992
Location: vermont,usa

Post by vtduc »

saw this on ebay
http://cgi.ebay.com/ebaymotors/DUCATI-M ... dZViewItem
also i have the one from my 92 907ie right one is cracked but easily repairable, left one shattered but i have the pieces if you need a project this winter. i have lots of other 907 parts like
headlight, taillight, expansion tank, 17" rims, rectifer, weber computer, stock chip and 907ie fim chip, stock pipes and a set of staintunes with only a ding on left side from a fall down, center stand
Post Reply