ducatipaso.org

I have a US model 91 907, I have silver body panel screws but I think the black looks much better and wanted to know if anyone knows where or how to get some. I don't know if its just certain models that had silver and others were black but I am curious so maybe it will be easier to locate a black set. Anyone that has any info on this please let me know.

Thanks.....Todd

Originals are black ones! ... from local Ducati dealer! I dont know prices, sorry.

Finnpaso wrote:Originals are black ones! ... from local Ducati dealer! I dont know prices, sorry.

It would cost about $ 1 each and $ 1.80 the rubber wellnut.

Ciao

The black coating on these seems to be a paint rather than a plating, they do rust over time, especially where the allen wrench goes. I am thinking of having these black chrome plated this winter, has anyone researched this?

Black chrome-plating Ducati well-nut bolts will be relatively expensive. If you're going to spend that kind of money, you might want to consider replacing the stock Ducati well-nuts with Dzus fasteners. I have them on one of my 907s and they're way cooler than the stock well-nuts.

Another solution is to sand all the paint off the heads w/ an electric sander. Although time consuming, this is an inexpensive solution and the end result is very elegant.

peace

mrinflux wrote:Black chrome-plating Ducati well-nut bolts will be relatively expensive. If you're going to spend that kind of money, you might want to consider replacing the stock Ducati well-nuts with Dzus fasteners. I have them on one of my 907s and they're way cooler than the stock well-nuts.

Another solution is to sand all the paint off the heads w/ an electric sander. Although time consuming, this is an inexpensive solution and the end result is very elegant.

peace

No matter, if you sand the bolts, you have paint it after.
If you don't do it, the bolts will go rusty soon.

Perhaps, the Dzus bolts would be the best thing, but I think not so good for the look of the bike.

I would paint black the original bolts. Cheap and effective .

Ciao

I bought some genuine Ducati screws listed on eBay as for a Monster and they are the same as the Paso screws - just black-green passivated, rather than gloss black paint. With a coat of paint, they will look like the original! I am not sure I have a part number for them, but I will have a look?

-Chris.

I got a quote on black chrome plating the body panel bolts, $4 ea x 32 = $128. Change your own oil and you've got it covered

There are two kinds of bolt.
The numbers are 037099013 and 037099018.
But, I repeat, I would paint the steel ones...
Ciao

awesome guys , thanks for the info. I really want black ones and I would be willing to pay the higher bucks to get a good product...where have any of you guys found a place that sells the original bolts or the black chrome ones? I cannot find anything close on google. Also, does anyone know the bolts screw sizes? If I knew that I could prob just order some from a custom supplier.


I will check out dzus fastners

Not sure of the lengths but I know they are 6mmx1.0pitch and 8mmx1.0pitch. I think the lengths are either 16mm or 20mm.

A good source is http://www.tastynuts.com/site/frames/fr ... online.htm

I have NOS 8mm bolts[black] but sorry, no new 6mm. believe need 6 8mm per bike. If interested, pm me.

thanks guys I really appreciate the info.

WHy not use the "allen head Dzus" fasteners ?
they look pretty much the same as the original Ducati ones and are not hard to fit if you have a steady hand with the drill !

Any web page in Eu markets to get those and what is price??? If price is same, as normal Dzus fasteners, i would go to normal Dzus then... Anyway, i am looking also something better fasteners to my Pasos fairings....