ducatipaso.org

Breaking a Paso? Have a garage full of parts? I could use the left hand switch assembly that has headlight and highbeam, horn, and turn signals.

Thanks lots!

Sheldon

smseigel@shaw.ca or PM me.

edit: for a Paso 750

What do you have to trade? I have one in useful but not new condition from a 906 I just picked up for parts.

Good question:

Lets see, I have a pair of aftermarket (not OEM) air scoop covers- one re-faired and one unpainted and undamaged. I have a swingarm that has been elongated (to fit non-standard tires by a previous owner) and is probably no good as a whole but has all of the hardware such as bearings and eccentric chain adjuster unit. I have a voltage regulator that I picked up in a parts bundle that I have not tested. I have an OEM US style rear lense with a 1" broken piece out of it but I have the piece so it could be fixed. I think there is a cracked turn signal lense in there too. I have a full dashboard with a cracked plastic facing cover and no "card" facing. I have not tested the instruments but they move freely and the clock shows 23,000 miles. I have an oil rad with a small leak (about a drop per hour of running time). I have a pair of used but still nice wire-lock rubber grips. There is probably a bit more, but I can't remember. If anything there appeals to you, let me know. If you have a particular request I could look through my stuff.

Cheers-

Sheldon

What I would really like is a pair of 4.5 auxiliary venturi tubes for the dcnf weber. Let me look over the switches to make sure they still work,just got it home and outta the truck so give me a day or two to check it over..................

sorry, I cant help with that. Mine came with the twin Mikuni and manifold conversion. What else?

SMS

I'm thinking on the grips,gotta picture? I'll post one of the switch tomorrow as I have a rare day off and the ones I have are kinda beat

You can certainly have the grips, but I can't take a pic until Friday night as I am away from the house. I'll get one to you as soon as I am back. Do you have a direct email?

Sheldon

Sheldon,

would you make a picture of the swingarm also ? Just for curiosity.

G.

Friday is ok with me, I'd like to see the swing arm as well. Got the switch off today and took some pics have not had a chance to put a DVOM to it yet but I see no reason for them not to work. They are a little weathered only one set of lettering is good.Will try to post pics after the family dinner for turkey day here.

I'll take pics of stuff late Friday.

I hope you have a great Thanksgiving!

Sheldon

Thanks Sheldon,T-day was great,2 turkeys and 22 people and more than the bird got stuffed

higgy wrote:2 turkeys and 22 people

Hey- I'm trying to attach pics. I don't know if this is working.
Sheldon

Trying again, Higgy...

P1000702.JPG
P1000703.JPG
P1000699.JPG (JPEG Image, 2816x2112 pixels) - Scaled (28%)