Page 1 of 2
907ie Hoses
Posted: Tue Feb 17, 2009 10:29 am
by englishstiv
Anyone tried these or know if they will fit? I know they are from an 851 but there could be a chance to mix and match or does anyone know where I can get a similiar set elswhere in the world?
http://cgi.ebay.co.uk/DUCATI-851-1992-S ... 240%3A1318
Re: 907ie Hoses
Posted: Tue Feb 17, 2009 11:38 am
by Tamburinifan
Re: 907ie Hoses
Posted: Tue Feb 17, 2009 12:35 pm
by englishstiv
Some good links there, many thanks > especially sporthoses.com
Re: 907ie Hoses
Posted: Sat Feb 21, 2009 10:29 pm
by Shelboss
It's too bad Sport Hoses doesn't make the T pieces in motorcycle sizes! If you do the coolant tank modification and use the Superflex hoses elsewhere, then the only challenge is the junction between the cylinders and the thermostat-to-radiator that Ducati does in the hose. This could be an aluminum block with 4 brass barbed fittings screwed into it. Mine is still in good condition, so this is not a priority yet.
Re: 907ie Hoses
Posted: Sat Feb 21, 2009 10:55 pm
by englishstiv
What is really annoying is that I have sent them a detailed email and they haven't even bothered to reply so looks like they are not interested in my business from this side of the world.
Re: 907ie Hoses
Posted: Sat Feb 21, 2009 11:53 pm
by higgy
keep in mind a lot of these small outfits are only in biz to support their racing efforts and they are all very busy this time of year
Re: 907ie Hoses
Posted: Wed Feb 25, 2009 11:25 pm
by englishstiv
Have had a reply folks
"Samco doesn't offer a kit for your application. However you might have some luck building a kit from the race parts section of the website. We can ship to England however it will probably be less expensive if you contact a Samco dealer over in england. Let me know if you have anymore questions."
Just out of curosity anyone able to give me an idea on cost over in the states for a full system for the 851 as at the top of my thread?
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 12:28 am
by jcslocum
Would this help??
http://www.frontiernet.net/~jcslocum/Du ... nk_Mod.pdf
Right click and download to your computer. it's 1.2 Mb
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 12:49 am
by englishstiv
Jon I am running Vista and the file shows as "being damaged and cannot be repaired" should I try an XP system to read?
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 1:01 am
by Tamburinifan
Same here w XP, "damaged-unrepairable".
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 2:14 am
by jcslocum
Hmmmmmm Lemme look at it and upload again. It's just a PDF.
Try it again. It didn't fully upload when I did it last time. Sorry about that.
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 11:24 am
by higgy
Works now Jon
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 11:27 am
by Tamburinifan
Works!
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 11:42 am
by persempre907
Works on my PC, too.
Ciao
Re: 907ie Hoses
Posted: Thu Feb 26, 2009 8:24 pm
by englishstiv
Thank you does for me too