ducatipaso.org

Hi,

does anyone remember having their clutch plates out and how much sideways play they had in the outer basket?
It looks like it has 2? bearings behind it - so I wouldn't expect to have any play?

Do these bearings commonly wear, since they take the load from the engine crank?


Tony

Ok, I'll answer my own question

Yes, the primary gear has 2 bearings (spacer and circlip between them)
The bearings are 47x25x8 and 47x25x12 with a 47x35x7 seal.

This gear gets a hard time. Its driven via straight cut gears from a cog on the crank and has the clutch basket bolted directly onto it. This is big load and torque for the 2 bearings to cope with, mine need replacing (I'm hoping these are the first bearings in the engine to show wear and that the rest are ok)

now to make a paper side cover gasket.............anyone done this? what about making alloy barrel gasket? (0.4mm)


Tony

The dealer will have the alloy gasket, maybe the paper too.

I have made paper gaskets before but not this thin.