Hi Higgy
Can I get on this group too please.
cheers
Dave
Paso Weberology 101
- higgy
- paso grand pooh-bah
- Posts: 3334
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Paso Weberology 101
sure,had enough of the Del's
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
- romus
- Posts: 135
- Joined: Wed Mar 25, 2009 12:06 pm
- model: 906 Paso
- year: 1990
- Location: Brisbane, Australia
Re: Paso Weberology 101
I have been updating my post "Understand the Weber (Weber settings+air/coils/fuel)" and have some other superflous notes and pics that I have taken of some of the process. At the end I can send you what I have and you could edit anything I can give into your book - why not make a word Doc and then turn into a pdf, so people can download it. Then my own text in the post can be removed and I would make a link to your pdf e-book.higgy wrote:... Btw I can make a book of our findings availible to anyone for,hhhmmm what do you think Warwick 1 billion dollars
Warwick - on a learning curve and on a
Ducati Paso - Soul of a thoroughbred
Ducati Paso - Soul of a thoroughbred
-
- Posts: 14
- Joined: Wed Jun 17, 2009 3:18 pm
- model: 906 Paso
- year: 1991
- Location: North West of England
Re: Paso Weberology 101
Am I in time to obtain info about the workings of the Weber carb?
I did get some basic info from an old fashioned carb tuner/repairer. he told me that it was the same carb as the MG Maestro !!! but with the chokes working together rather than progressively. I assume that the settings were also the same.
It would be good to be able to understand the beast and to get it working efficiently.
I did get some basic info from an old fashioned carb tuner/repairer. he told me that it was the same carb as the MG Maestro !!! but with the chokes working together rather than progressively. I assume that the settings were also the same.
It would be good to be able to understand the beast and to get it working efficiently.
- higgy
- paso grand pooh-bah
- Posts: 3334
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Paso Weberology 101
working on a compilation of PM's I will add you to the list when it is finished. Once the project is completed we will post our findings here for all to see
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
-
- Posts: 14
- Joined: Wed Jun 17, 2009 3:18 pm
- model: 906 Paso
- year: 1991
- Location: North West of England
Re: Paso Weberology 101
Higgy,
Thanks, I'm sure we all appreciate your work, information and advice.
Thanks, I'm sure we all appreciate your work, information and advice.
Re: Paso Weberology 101
higgy can you please include on your list for the weber mods cheers shayne
-
- Posts: 14
- Joined: Fri Nov 13, 2009 3:28 am
- model: 907 I.E.
- year: 1991
- Location: New Zealand
Re: Paso Weberology 101
count me in to please
- persempre907
- paso grand pooh-bah
- Posts: 3312
- Joined: Tue Dec 06, 2005 12:00 am
- model: 907 I.E.
- year: 1992
- Location: Roma, Italia
Re: Paso Weberology 101
It would be nice see it here, too.
Ciao
Ciao
Francesco
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
Ducati 907IE 1992 Rosso
Ducati 907IE 1993 Nero
Moto Guzzi Galletto 1960 Sabbia
BMW R Nine t 2019
- higgy
- paso grand pooh-bah
- Posts: 3334
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Paso Weberology 101
G has made it available in the documents section. Thank You G With the changes it may be temporarily off line.
I am sure it will be back shortly when Mike gets finished
It is all included in Warwick's and My weber mod pdf
Till it re appears here you can download a copy from my site,http://mysite.verizon.net/vze2hw9t/
Its free and will be kept updated and refined as my work schedule permits
also until I get my download counter working please sign the guest book just to let me know you got a copy...no strings attached.. If you feel you just must make a contribution, donations to Mike for this site can be made on the front page here http://ducatipaso.org/: cool:
A very special thanks goes out to Romus for his invaluable contributions of time and effort
Thank you again,Romus Great job
I am sure it will be back shortly when Mike gets finished
It is all included in Warwick's and My weber mod pdf
Till it re appears here you can download a copy from my site,http://mysite.verizon.net/vze2hw9t/
Its free and will be kept updated and refined as my work schedule permits
also until I get my download counter working please sign the guest book just to let me know you got a copy...no strings attached.. If you feel you just must make a contribution, donations to Mike for this site can be made on the front page here http://ducatipaso.org/: cool:
A very special thanks goes out to Romus for his invaluable contributions of time and effort
Thank you again,Romus Great job
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie