Page 1 of 1

Soul of the Paso

Posted: Thu Jan 07, 2010 1:27 am
by higgy
teaser teaser teaser :thumbup: :thumbup: :thumbup:
The Soul Of The Paso belongs to the Weber :thumbup:
The soul of the Weber is the ET and AV :evil: in the details

stay tuned...............for one more chapter in Weberolgy 101 :cool:

Re: Soul of the Paso

Posted: Thu Jan 07, 2010 12:50 pm
by Finnpaso
ET??? AV???

Re: Soul of the Paso

Posted: Thu Jan 07, 2010 2:11 pm
by paso750
emulsion tube and auxiliary venturi

Re: Soul of the Paso

Posted: Thu Jan 07, 2010 6:22 pm
by Finnpaso
Thanks, "G" :thumbup:

Re: Soul of the Paso

Posted: Fri Jan 08, 2010 12:36 am
by higgy
we have details on a modified stock f27 emulsion tube in conjunction with 4.5 auxiliary venturi's and a few other standard mods to solve all those weber blues out in Pasoland.
Warwick and I are working on the final draft and it should get posted very soon. As a side note it most likely will work with the stock 3.5 aux venturi's just not as well.....
Hey Antti, or G any chance you guys have a data sheet on a motorola MC68705S3CS :banghead: can't seem to locate one for these old eeproms or a good cross reference

Re: Soul of the Paso

Posted: Fri Jan 08, 2010 4:49 am
by Finnpaso
I am very hurry just now(no time to look closer), but try this one: http://www.ic2ic.com/search.jsp?sSearchWord=MC68705S3CS

Re: Soul of the Paso

Posted: Fri Jan 08, 2010 7:01 am
by higgy
already checked every resource I could find and posted a request on at least 5 different electronics forums including one for motorola
So far no luck and I don't know enough about it to know the difference between an s3cs or an r3cs or a p3cs. I can get one for either the r or p '3cs'
but have not come up with an s3cs. I suppose I could get either of the r or p or both and map them out and then map out the s and look at the differences between the 3
and decode it that way. Any of your input would be appreciated on the idea :thumbup: When you have some 'spare time" :lol: :lol: :lol:
Thanks Antti :beer: :beer:

Re: Soul of the Paso

Posted: Sat Jan 23, 2010 4:24 am
by Mc tool
paso750 wrote:emulsion tube and auxiliary venturi
Thats better ( Higgy :P) yeah Im back, forced layoff . Sheeit ! you sure dont have to finger jab a laptop screen to hard to break it ( I blame photobucket )