BRAKE CALIPER MOUNTING PLATE TEMPLATE

4away · Post by **4away** » Fri May 20, 2005 5:37 pm

I AM UNABLE TO ACCESS THE SITE SUGGESTED BY ANSIM TO PRINT OFF TEMPLATES TO ALLOW ME TO MAKE A CALIPER MOUNTING BRACKET (DOG LEG SHAPED) TO CONVERT TO A TWIN POT 65MM BREMBO BRAKE CALIPER TO FIT TO MY 1990 DUCATI 750 PASO. IF ANYONE HAS OR KNOWS WHERE I CAN GET THE TEMPLATE COULD YOU CONTACT ME ASAP,

THANKS,

4AWAY (AL)

DucSoup · Post by **DucSoup** » Sat May 21, 2005 12:59 am

??? I thought 1988 was the last year for the 750 Paso ???

If I find a template link I'll sendt it on.

Finnpaso · Post by **Finnpaso** » Sat May 21, 2005 7:30 pm

Hey guys, remember, that 750 Paso have been sold in many years.... Other talks about model year and some talk about year, when bike have "put to street"

I read just, that one 0km Paso(new!) with silver triple clamps(very early made!) and Öhlins(what is very good in Paso

) was bought 1993 !!!!

Finnpaso
907IE
750 Paso

Post by **jcslocum** » Sun May 22, 2005 2:01 am

Check this info:

http://tinyurl.com/9w3ry

You can see the info and the files are in a format for Autocad. This is what a professional designed/engineer works in and a machine shop should be able to open.

Gerhard uses the older 40MM calipers and this is what the drawing is for.