Page 1 of 1
906 ignition switch??? tyres??? silencers???
Posted: Thu Aug 26, 2010 11:24 pm
by nnnnnnorman
hello. required for my 906(much loved). a replacemnt ignition switch or info on where to get one or the parts no. or corresponding/matching part tnat will fit and work on my paso. the last time i went for a ride over enthusiasm and lack of attention to my knee mirrors led to me getting stopped by plod mobile division who saw my hot wire remedy to my ignition switch problem(lack of), put two and two together and impounded my bike on the grounds i had nicked it. £200 later and i got her back but now need to remedy this glitch to prevent a repeat debarcle. please help asap so the indian summer can be enjoyed to the full. TYRES TYRES TYRES TYRES? WHATS THE LATEST NEWS OR SOLUTION TO THIS DILEMA?
ive got a couple or three thou left on my michelins and do not want to change wheel sze. is it avons for me? opinions please.

any one got any mot legal silencers or suggestions what to fit. any condition as long as they pass muster. at the mo ive got a pair of boscats on that im happy with but they are stamped not for road use and my friendly mot man has departed for sunnier climes.HELP! please call norman on 07919037083 any time on any of these matters. cheers. im in lewes in sussex.

Re: 906 ignition switch??? tyres??? silencers???
Posted: Thu Aug 26, 2010 11:57 pm
by paso750
I have one but it`s missing the upper plastic cover. It was disassembled and cleaned and then rolled off the work bench. Works fine though.
Regarding tires, it`s all posted here or in the P750 forum. It`s either 130/70-16 + 150/80-16 or 180/60-16. While I think the second option is better it requires modifications, the first probably a longer chain only.
G.
Re: 906 ignition switch??? tyres??? silencers???
Posted: Fri Aug 27, 2010 12:08 am
by nnnnnnorman
thanks for your reply. will it work ok without the missing plastic cover or can i get that seperate? how much dollar including post to me i sussex? i want it bad and i need it to work., missing my paso.thanks
Re: 906 ignition switch??? tyres??? silencers???
Posted: Fri Aug 27, 2010 7:04 pm
by paso750
you have a pm
Re: 906 ignition switch??? tyres??? silencers???
Posted: Fri Aug 27, 2010 8:04 pm
by nnnnnnorman
thahk you gerhard and thanks to every one who offered help. the paso grand pooh bah has cme up trumps with a ignition barrel and switch complete with three keys!!!!! its winging its way to me right now. i am VERY HAPPY about this. thanks again my search is over, now for silencers and tyres....
Re: 906 ignition switch??? tyres??? silencers???
Posted: Sat Aug 28, 2010 10:30 am
by paso750
fyi, I brought it to the post office this morning.
G.
Re: 906 ignition switch??? tyres??? silencers???
Posted: Mon Aug 30, 2010 7:37 pm
by nnnnnnorman
lovely. thanks for your help. you are a true gentleman