ducatipaso.org

Hey guys! I am wondering if anyone has a wiring diagram for wiring the integrated euro turn signals. The ones I have are starting to fall off (they were trimmed and no longer are in one piece).
Is this a fairly easy project to wire the integrated turn signals?

Thanks,
Dustin

http://www.box.net/public/q1jdmz8ub9

http://www.box.net/shared/3elasen7q7


750 wiring diagram compared to a 907ie

Easy enough and for certain simple if you use a test bulb mock up to sort out your circuit route


easiest way to remember is that both earths go to the unit and not the frame.

Do you happen to know if there are certain bulbs that should go there? I took things apart and noticed that there were no mounts for bulbs, so I am assuming that I will have to get the system from the auto parts store down the road. The wiring seems like a piece of cake. Hopefully I'll get it done first try

Sorry I assumed you had a euro tail light fitted If you can wait a day or two I can post a photo of the light internals etc as mine is off the bike.........................unless someone can post one quicker?????????????????? you never know?

I took the rear tail light cover off and noticed that there was no housing for the turn signal bulbs (attachments and hookups). The man I bought the bike from wasn't a fan of it so he got rid of it. Though the turn signals I have on were cut to be as short as possible and due to age they are falling off... no epoxy will hold it together anymore. I like the style of the euro tail light anyways because I feel it makes the bike look more sleek. I feel though it's a preference thing.

I'll gladly take any pictures you have!!
Thanks!!

sounds like your bike never had a Euro taillight, but the red US one with external turn signals.
My bike came with a converted US taillight. The last owner had found some metal reflectors he bolted into the taillight. Then he replaced the taillight cover with the Euro red/amber lens.
I don`t have it anymore so i can`t make any pictures.
If you can`t find any reflectors you still could try to take apart some old turn signals and use those.
Although I like the Euro taillight better also I don´t know how much sense it makes to do a conversion unless you have a Euro taillight cover. They are very hard to find and there seem to be only 2 shops known that still have a few.

G.

Thanks for the info! When I get home I'll take pictures and post them and hopefully they will help. I don't think I described it as well as it could have been. I know it has reflectors on the sides. I spoke to the man I bought it from and he said that it can be done, but he didn't like it so he removed everything and rewired the turn signals himself.

Hopefully these pictures a clear if you want any further info let me know

englishstiv wrote:Hopefully these pictures a clear if you want any further info let me know

Please...
....would you sell it to me ? I need one !
Please anwear! Thank u....