ducatipaso.org

Hi all,

Earlier today I finished the wiring upgrade on the Paso and took some shots of the finished article.
The relais and the fuses on the electronics plate:


The relais at the coils:


Checked and double-checked after everything was connected and held my breath pressing the starter button: Success!!!
It works a treat and I'm pretty stoked that it all worked first go. I used crimped connectors and shrink tubing on the joints. During the upgrade I also took apart all the connectors and cleaned all the contacts.

As always, the information on this forum is absolutely fantastic in keeping a Paso running!

Cheers,

Mike

Well seeing that sure helps me with a decision at hand, Im gunna have spaghetti on toast for brekkie

This would be the kind of spaghetti where you have to cut the strands to size and have to replace some sections before putting it on the toast?

PasoRoo wrote:This would be the kind of spaghetti where you have to cut the strands to size and have to replace some sections before putting it on the toast?

and heat shrink the ends , Really , I wasnt dissin' your wiring , It looks all properly done to me . I really was tossing up between bacon & eggs or spag ( I like to cook up a good brekky on sundays coz thats the day " she " sleeps in .... and misses out ..... he he he fucks her off no end )

Mc tool wrote:Really , I wasnt dissin' your wiring

I didn't think you were McTool . It's just that, if cooking your spaghetti on toast took as long as sorting out the pasta on the Paso, it would have been dinnertime before you were serving anything!

It was ham and cheese omelet (yes, with toast) this morning on the other side of the ditch.

Mike

mussel patties.........carefully .Last night I got on the piss for the 1st time sinse the prang (15 months ), what a laugh . Im still pretty wobbly on my elbow crutches at the best of times ,but pissed is a whole different thing, put my elbow thru the dunny wall