ducatipaso.org

Well unfortunately I have to part the bike out the computer is shot and I cannot get another. If anyone needs parts from the 92 907ie let me know.

That is a pity!!

Marellis can be found , I think the one fitted on the 851 should work on the 907 "straight from the box"

here is one available on Ebay USA
http://www.ebay.com/itm/Ducati-Magneti- ... es&vxp=mtr

I have One myself, but I was keeping it as a spare.

Here is some info regarding the ECUs.

http://www.avantiraceparts.co.uk/page.php?id=15

They can be repaired, I had one done by a friend of mine who is an elecronics specialist. Look inside and see if there's any burnt components for starters. A good Hi Fi repairman can test components see if they're doing what they should. It might be the chip, if you put them in wrong way round they fry inside. Look for the half round cutout at the end, it matches the board. I have a spare standard chip and a Baines copy.

Whoa, I guess it's kind of like heart failure...
duc24u, sounds like you have options for a new heart.

Why not try http://www.cajinnovations.com/MyECU/index.htm
they have kits and assembled replacements. IMO this is better than parting out an other Paso.
Otherwise sell the bike as a whole to someone who wants to bring it into live again.

http://www.endless-horizons.net/efi/efi.htm: here you can find a lot of info about the Marelli unit.
also the P7 is used in a lot of cars.

I hope you think about it differently.

Bertus

No I sent the computer to carnival in the Netherlands they said all the processers were fried. Is it true the 851 works on the 907 and how would I know that computer for sale was good. Crap I have never been able to ride my dream bike.THAT'S WHAT REALLY STINKS.

if you are going to part out the bike there is a bunch of stuff i would like to buy


pm sent

duc24u wrote:Well unfortunately I have to part the bike out the computer is shot and I cannot get another. If anyone needs parts from the 92 907ie let me know.

i have a computer sitting in a box under my bench. These are still available new.

I also have 2 chips for it but will supply the standard 907 chip with it if you want to PM to discuss.

hi duc24u.

the 851 or 888 P8 will work on the 907.
you can find bodyparts at airtech-streamlines, see link below.
http://www.airtech-streamlining.com/duc ... 991-92.htm

Bertus

Any ideas I pm some people but no response. I WANT the ECU. How do I know if it works and if you can get them new, where would you get it? All and any advise is and would be good. Thanks for any help.
O

Where are you? I will sell my spare if you can't get one elsewhere. It worked fine a few years ago and is from a 92 model. I can test it on my bike.

Keith (Essex UK).

How positive of a match is the 851 computer? Does anyone have that computer on their bike.

duc24u wrote:Any ideas I pm some people but no response. I WANT the ECU. How do I know if it works and if you can get them new, where would you get it? All and any advise is and would be good. Thanks for any help.
O

Your reply has been sent.

P7 from car doesn't work.
P8 from 888 is bolt-on but need a custom chip for a 907.
851 P7 works w the original 907 chip.

Well it seems I maybe able to obtain a computer, but would need an original 907 chip anyone have an idea where to get one of these. I have done some looking but have fell short on the hunt. Thanks again. If I find this maybe there is hope for life in the duc afterall.