ducatipaso.org

I don`t really care as I don`t have one but I was asking myself that when I saw these nice Contis
http://www.ebay.com.au/itm/Ducati-Conti ... 2a2a3e2bf8
I`ve seen Contis on a Sport before but I`m wondering if they are different ones.

G.

Hi G.

I would say they will fit. the angle of the joint seems to be the same as on a sport.
Bertus

I can check if you want G as I have a sport and a 1997 750SS.

Cheers
Andrew

Hello Andrew, if that is still the old carbed SS and not an SSie that would be very interesting.

G.

Yep,carbie equipped 1997 model.I just held the Contis from the Sport up against the SS pipes and they look almost identical.I'd say they would go straight onto a Sport.If I was'nt saving for some new forks for the Sport I'd be looking at snapping them up myself.Then again maybe the forks can wait a bit longer

Cheers
Andrew

so they look the same but do they fit ?

I'd have to remove the exhaust off the SS to find out.I would'nt be able to do that until tomorrow if you really needed to know.

Cheers
Andrew

That`ll be great if you could try. There`s no hurry at all.

Nope,not going to fit.The bend is wrong and putting the pipe into the swingarm.

Cheers
Andrew

Sold...I wonder who could have bought them







looks like the sport is on the backburner again


Cheers
Andrew

thanks for trying if they fit, Andrew

No worries mate.

I had a conti on my sport, dunno anything other than it looks the same as the ones you linked



Cheers, Alex

From these photos you can see they are not even close.The Conti from my Sport is rubbing on the swingarm and to low to connect to the hanger.Sorry for the phone photos but it's all I had charged.





And the new.





These actually only miss the swingarm by 5mm and I had to use some force to lift and line up the hanger holes.

Cheers
Andrew

Looks like some careful bending of the hanger plates would give you some extra clearance.