ducatipaso.org

For like a late 80`s Fiat f e?
And what did it cost as an original part, over 900 Eu (was given that from a dealer)?

Hi G,

i don't think the 906/907 radiator was used in a car.
maybe you can use the bent one from a 888 or 916. in this occassion the cooling area is larger as maybe necessary.

Bertus

Tamburinifan wrote:For like a late 80`s Fiat f e?
And what did it cost as an original part, over 900 Eu (was given that from a dealer)?

Are you chasing a Radiator for a 906/907?

If you are, Italspares in Adelong (Aust) have a "few" according to Jim/Ian. I have one on hold for my next order. Cost was AU$125. Even comes with a fan I believe? They will post worldwide.

Cheers.

Nick.

I have a spare if you need one.

I doubt a car has such a small and also bent radiator.
If you`re just looking for an indication of what a radiator did cost back in the day you probably can take the price of a new ST2 radiator (which looks nearly the same, too) as comparison.

If you're searching for a stock radiator, sometimes they pop up on ebay.
If I I well remember, I have got 2 spare ones (I've to check my shelves). If you are in need of one, let me know.
Ciao

The radiator is not bent but is quite small.

Not sure if I need another rad, what are the sympton for that?
In normal riding seasons temps, 15-20C, engine temp rises quite rapidly
in town or when I drive at 50 km/h.
Water seems to run freely though rad and thermostat checked & functional.

gert I have a spare if you are interested although I doubt that the overheating lies with the rad as it is a very simple affair. let me know had it on ebay several times now with no interest at £30.00 plus postage so they must be common enough out there.