Page 2 of 2

Re: Replacing the Digiplex S2 on the 906 Paso

Posted: Mon Oct 29, 2018 1:31 pm
by Spaggy
I need a new box, so am trying various sources, but wondered if anyone using this site has a working one they are prepared to part with.
It will be for a 906.
I'm in the UK so it will be worth checking the cost of postage.
Thanks

Re: Replacing the Digiplex S2 on the 906 Paso

Posted: Wed Nov 28, 2018 11:29 pm
by JWilliam
ducinthebay wrote:Got my new Digiplex in the mail last week. Installed it yesterday, and went for a ride today.
I've said this before, change the standard ignition coils to modern units from eg. an Aprilia. The standard coils have a very low impedance (<0.8 Ohm) that causes overheating of the Digiplex. With a high impedance (3.5 Ohm) coil the unit is not overdriven and is quite reliable, my Paso stil has the original Digiplex.

Re: Replacing the Digiplex S2 on the 906 Paso

Posted: Tue Dec 04, 2018 1:25 am
by Spaggy
JWilliam wrote: my Paso stil has the original Digiplex.
Mine still would have too if I hadn't been such a dipstick and put a new battery on with the terminals reversed.
Cue melting wiring and smoke, and a non-working ignition system.
I have a new IgniTech one now so will see how that goes.