Page 1 of 1
750 valve rocker set (upgrade)
Posted: Tue Jun 04, 2013 5:10 pm
by paso750
the same that the P750s with the golden valve covers (and most later Ducs incl. 750S, 906 etc) have.
So only of interest if you have a pre '88 P750. The clips make changing the valve shims a lot easier.
http://www.ebay.de/itm/310680792896?ssP ... 1438.l2649
Re: 750 valve rocker set (upgrade)
Posted: Fri Jun 14, 2013 3:28 pm
by 20YearOwner
Hi paso750,
Is this kit a good price $$?
Have you converted old to new?, is it easy or hard?
Best,
Re: 750 valve rocker set (upgrade)
Posted: Fri Jun 14, 2013 3:47 pm
by paso750
it went for €38 that is really cheap. One single rocker arm on ebay is often €20-25.
Here are for exanple the parts for one single cylinder head and they`re asking €90
http://www.ebay.de/itm/DUCATI-SS-Monste ... 3cd1f9919b
So whoever bought them (and if the rocker arm surfaces were not worn) got a bargain.
I have converted from old to new but I had that done when the engine was rebuilt.
It`s not a very difficult thing to do. You find the description in the 906 workshop manual or in any from a SS/Monster.
G.