Page 2 of 2
Re: Starter Clutch for 907ie
Posted: Mon Jul 28, 2014 2:09 am
by du907
Re: Starter Clutch for 907ie
Posted: Sat Aug 09, 2014 10:00 am
by paso750
Meanwhile there`s someone on ebay UK selling the springs
http://www.ebay.com/itm/DUCATI-SPRAG-ST ... 3ce52a19b2
Re: Starter Clutch for 907ie
Posted: Sat Aug 09, 2014 12:40 pm
by Whiff Ducbreath
Hi Nick. I wanted to bother you one more time. I have all my parts togeth#r. Before I ruin something, I take the spring out of the sprag and throw it away. Then take the spring out of the SKF seal and put it in the sprag where the old slrag spring.was. Is that corrext?
Thanks a million
Russell
Re: Starter Clutch for 907ie
Posted: Sat Aug 09, 2014 7:56 pm
by nickta
Yep, that's what you do. Don't forget to wrap the sprag in tape before you pull the spring out,otherwise all the little sprags go everywhere!
Cheers.
Nick.
Re: Starter Clutch for 907ie
Posted: Mon Aug 11, 2014 4:33 am
by Whiff Ducbreath
Ah Ha! I was wonderingwhat was the purpose of putting a spring there. Its a little greasy, but no problem. Good thing I asked before they flew all over the kitchen. I had to buy 5 of the seals to get an actual SKF seal. Many places that say they sell SKF only actually sell generic seals. If anyone else ever has to change a sprag, I have 4 extra seals.