ducatipaso.org

Ill be looking to replace the rusted exhaust next.
Are the header pipes with the cross piece on the 907 same as on other models? I see one for sale for a 750 paso, would that have the same diameter?

In the early nineties I used to see paso's with black-chromed megaphone's, with a counter taper at the end. They were straight through, with a dimpled "conti-style" inner pipe. They might have been conti's, not sure. But they would have been shorter than the traditional conti's for the beveldrive 900. (and black) Does anyone know these black pipes and if you can still get them?

Cheers J

900 pipes not the same.

l have these f sale:

http://www.ducati.ms/gallery/files/9/4/ ... _bos_2.jpg

Look like BUB pipes. A bit loud, but lovely. I have a set that are going onto my 907.

Phil

Tamburinifan wrote:900 pipes not the same.

l have these f sale:

http://www.ducati.ms/gallery/files/9/4/ ... _bos_2.jpg

Thanks
Those are noce but not what I am looking for. I'll keep looking
Cheers JT

ducinthebay wrote:Look like BUB pipes. A bit loud, but lovely. I have a set that are going onto my 907.

Phil

Looked at the BUB site but couldnt find anything like that. Not an easy site to look for special stuff.
Do you have a link or a picture?
Cheers J

Hi JJW,

I guess I use a set your looking for.
can't say they come from Conti, as they wear no stamp from the manufacturer.
I'll post a picture the other day, so you can decide these are the ones you're looking for.

BR.

Bertus

Have a look at this company they are just up the road from me. They have a sister company that is heavily involved in old Ducati racers etc.

I am hopefully getting a set of silencers off them in 2016.

They will be taking my bike for full analysis to get the correct specs' etc.

It may suit your purposes ?

http://www.quillexhausts.com/

Hi JJW,

did they look like this? Sorry for the poor lightning.