stock rear shock

bavarian · Post by **bavarian** » Mon Nov 07, 2005 2:37 am

Is the stock rear shock on a '88 750 Paso rebuildable? Mine is starting to seep oil.

Finnpaso · Post by **Finnpaso** » Tue Nov 08, 2005 8:08 pm

If U have Öhlins, ITS that, but i dont know that older Marzhocci in 750. Btw, that Öhlins is much better shock

That 907 later model rear Marzhocci is, cause mine was rebuild by Öhlins maintainer. Also i find rebuild kit from Ducati, but i am not sure, is it anymore available.

Finnpaso
Paso 750
Paso 907IE

bavarian · Post by **bavarian** » Fri Nov 11, 2005 10:09 pm

My Paso has the stock Marzocchi shock. I'd like to get a used Ohlins for it. What part/model number Ohlins will fit a 750 Paso? I'm also going to call the dealer Monday and find out if there is a rebuild kit for the Marzocchi.

ved · Post by **ved** » Sun Nov 13, 2005 10:16 am

bavarian wrote:Is the stock rear shock on a '88 750 Paso rebuildable? Mine is starting to seep oil.

at the moment in ihbäh
http://cgi.ebay.de/Ducati-PASO-906-Marz ... dZViewItem
or
http://cgi.ebay.de/Ducati-PASO-907-i-E- ... dZViewItem

bavarian · Post by **bavarian** » Sun Nov 13, 2005 10:29 am

Thanks for the link ved, but that shock and rebuild kit won't work on a 750's shock. The rebuild kit won't fit the shock and the shock is too large for the limited space on the 750 Paso from what I have read.

davidhughrose · Post by **davidhughrose** » Sun Nov 20, 2005 3:00 am

I have the same seeping issue with my 88 Paso shock. Works Performance produces a shock for the Paso. The remote reservoir installs with hose clamps, so it's not the cleanest install. My shock continues to work pretty well despite a drip here/there, so I haven't installed the WP unit yet. I plan to weld up an aluminum clamp of some sort, that will make the shock worthy of being installed on my Paso. Hose clamps!

bavarian · Post by **bavarian** » Sun Nov 20, 2005 8:19 pm

The Works Performance shock is only $350 as well. If you do get one let me know how it feels. I've also had a few crazy thoughts of just getting an Ohlins, but have been so far unable to find any info as to which model would fit the Paso.

Finnpaso · Post by **Finnpaso** » Wed Nov 23, 2005 6:23 pm

Hi !

Original Paso 750 Öhlins is modell: CA 508, but i am 98% sure, that You cant find such new from any Öhlins shop anymore.

Finnpaso

Paso 750 -89
Paso 907IE -91
ST4S -02 (tomorrow i got it from Germany) :lick: (cant wait!!!!)

stock rear shock

stock rear shock

rear shock

Re: stock rear shock

rear shock

rear shock