Help for GIVI wingrack

persempre907 · Post by **persempre907** » Fri Dec 09, 2005 8:48 am

Hi everybody,
I have bought on ebay a used GIVI wingrack for 2 side panniers for my Paso 907.
But I don't know how to mount it and if they are all parts for fitting.
Someone can tell me how do it?
Many thanks.
Francesco

Post by **Skins** » Fri Dec 09, 2005 5:32 pm

I think GIVI are a very good company. If you contact them I'm sure they will be helpful. Have you looked at their website?

persempre907 · Post by **persempre907** » Sat Dec 10, 2005 7:33 am

Thanks for your reply.
Yes, I have tried to see on their website and I have even asked to GIVI, but they have answered to me only that the item is out of production

!!
Francesco
P.S. Sorry for my bad English.

Post by **Skins** » Sat Dec 10, 2005 7:54 am

Your English is very good, Francesco!

Are you sure the rack was designed to fit to a 907? If so, it should not be too difficult to find see how to fit it, even if some parts are missing, and you have to make up a few parts yourself.

Is there a motorcycle shop nearby who can help you?

persempre907 · Post by **persempre907** » Sat Dec 10, 2005 5:41 pm

No, I'm not sure even if the vendor said so.
I will try to ask to Ducati dealer, but they don't know well this old bikes.
Bye.
Francesco

persempre907 · Post by **persempre907** » Sat Dec 10, 2005 5:51 pm

No, I'm not sure even if the vendor said so.
I will try to ask to Ducati dealer, but they don't know well this old bikes.
Bye.
Francesco

Finnpaso · Post by **Finnpaso** » Sat Dec 10, 2005 10:15 pm

Ducati have sayed, that they can deliver 10 years spare parts to they bikes, not longer! Thats why it start to get very hard to find parts to Pasos.

That is most important reason, why i bought ST4S

persempre907 · Post by **persempre907** » Sun Dec 11, 2005 2:11 pm

I've bought my 907 in last May and, since some part needs to change, I'm often going to the Ducati official dealer.
I've not had sensation that actually they are problems for the spare parts.
Only for the cover of the dashboard they have said to me that is available only the entire item even if the cover was indicated as spare part in their list.
If someone have some problem with some spare part,I can try to ask to the local italian dealer.
Bye everybody.
Francesco

Post by **Skins** » Sun Dec 11, 2005 4:25 pm

That's great, Franceso. I think the dashboard cover is going to be the biggest problem for owners. I take it Cagivas never came out with the same instrument case? If we could find out where the injection molding tool for the case cover is, I'm sure we could acquire it without too much trouble. Then, I'm sure a small production could be organised.

I hope you can get your Givi rack to fit. Good luck!

persempre907 · Post by **persempre907** » Tue Dec 13, 2005 11:30 am

No, Cagiva don't ever mount the Ducati dashboard.
We would can to ask to "Veglia Borletti", the italian company that built the dashboard.
Bye.
Francesco

persempre907 · Post by **persempre907** » Tue Dec 13, 2005 11:30 am

No, Cagiva don't ever mount the Ducati dashboard.
We would can to ask to "Veglia Borletti", the italian company that built the dashboard.
Bye.
Francesco

Finnpaso · Post by **Finnpaso** » Tue Dec 13, 2005 2:31 pm

Francesco, Can You make any connection to Veglia Borletti and ask that thing by mail, or calling, cause its very importand thing to many Paso owners??? It can be best, if some Italian guy start to ask that tool to make one patch of those instrument covers....We can make list, how many need them, but surely very many want one for working and one for spare part for future... They cant be very expensive....

persempre907 · Post by **persempre907** » Thu Dec 15, 2005 9:35 am

I will try and I will make know!
Ciao.
Francesco

persempre907 · Post by **persempre907** » Thu Dec 15, 2005 10:02 am

Hi everybody,
I just have sended a request by the website Magneti-Marelli, that sell the products of Veglia-Borletti brand.
I will make know!
Francesco

Post by **Skins** » Thu Dec 15, 2005 4:36 pm

Great! Thanks, Francesco.