Ducati 906 paso wheel spec
-
- Posts: 3
- Joined: Sat May 18, 2019 3:11 pm
- model: intending to buy a Paso/Sport
- year: 1986
- Location: Norway
Ducati 906 paso wheel spec
Hello i was wondering if anyone know how wide the 906 paso wheel is at the hub ? i mean from spacer to spacer with the sprocket hub in place .
- paso750
- paso grand pooh-bah
- Posts: 5558
- Joined: Sun Jul 18, 2004 12:00 am
- model: 750 Paso
- year: 1987
- Location: southern Germany
Re: Ducati 906 paso wheel spec
not sure what you mean by from spacer to spacer but the width at the hub is 159mm rear, 125 front rim
-
- Posts: 3
- Joined: Sat May 18, 2019 3:11 pm
- model: intending to buy a Paso/Sport
- year: 1986
- Location: Norway
Re: Ducati 906 paso wheel spec
i mean how wide the wheel is in the center ,lets say when the center bolt is put in and then make a mark on each side of the center bolt with the spacers . That was not easy to explain
But i guess the answer you gave me is that measurement?
![:D :D](./images/smilies/cheesy.gif)
But i guess the answer you gave me is that measurement?
- paso750
- paso grand pooh-bah
- Posts: 5558
- Joined: Sun Jul 18, 2004 12:00 am
- model: 750 Paso
- year: 1987
- Location: southern Germany
Re: Ducati 906 paso wheel spec
my dimensions are the width of the rim at the hub. Basically outer side of one wheel bearing to outer side of the other. The pan of the sprocket carrier included it`s ca 207mm width
- Attachments
-
- Abmasse.jpg (45.12 KiB) Viewed 6258 times
-
- Posts: 3
- Joined: Sat May 18, 2019 3:11 pm
- model: intending to buy a Paso/Sport
- year: 1986
- Location: Norway
Re: Ducati 906 paso wheel spec
Thank you that is the measurement i needed .