907ie Choke lever WANTED

Paso items for sale or wanted
Group members may list non-paso classified ads
Post Reply
User avatar
englishstiv
paso grand pooh-bah
Posts: 1111
Joined: Wed Apr 09, 2008 9:57 pm
model: 907 I.E.
year: 1992
Location: Manchester, England.

907ie Choke lever WANTED

Post by englishstiv »

Handle bar Mechanism required or info on a like for like unit used on other Ducati bikes.

Appreciate it is attached to the Clutch fluid pot.

England UK Europe based

Many thanks :thumbup:

Stiv
DUCATI 907ie 1992
HARLEY DAVIDSON ELECTRA GLIDE CLASSIC 1991
Mc tool
paso grand pooh-bah
Posts: 1875
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Newzealand

Re: 907ie Choke lever WANTED

Post by Mc tool »

Im sure there are a couple of wee screws holding the lever assy to the clutch cylinder,(you have to get the lever bit out to get at the screws) and I also think ( its been a good day )that its the same lever/cable assy on most belt drive ,webered or mikunied dukes....ie same lever/cable assy on both my paso and my 97 SS .
I wish I was young again............Id be heaps smarter than last time
User avatar
Derek
paso grand pooh-bah
Posts: 768
Joined: Thu Nov 03, 2011 10:13 am
model: 907 I.E.
year: 1994
Location: Scotland

Re: 907ie Choke lever WANTED

Post by Derek »

Yes it's held to the clutch cylinder with 2 screws and you have to remove then to get it off to swap the cable. It is also used on the '92-'97 SS models and is still available from Stein Dinse.
https://www.stein-dinse.biz/product_inf ... _id=156804
Image
Have you tried asking UK dealer for one for an SS?
1994 907ie
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)


Scotland
User avatar
englishstiv
paso grand pooh-bah
Posts: 1111
Joined: Wed Apr 09, 2008 9:57 pm
model: 907 I.E.
year: 1992
Location: Manchester, England.

Re: 907ie Choke lever WANTED

Post by englishstiv »

Cheers guys yes I know its attached to the reservoir body by the screws and I hopefully will be able to speak to my local Ducati Dealer from Monday this week, I'll also email SD as suggested. Good to see it may be on another model as was unable to see anything on those later types when checked myself. Sadly mine has split and the glue variants used to repair are just not up to the job and fail very quickly. :banghead:
DUCATI 907ie 1992
HARLEY DAVIDSON ELECTRA GLIDE CLASSIC 1991
Mc tool
paso grand pooh-bah
Posts: 1875
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Newzealand

Re: 907ie Choke lever WANTED

Post by Mc tool »

If you find different part numbers it might be relevant to the length of cable , and , have you tried polyester fibreglass resin ( without the fibreglass )? often works where epoxies wont stick.
I wish I was young again............Id be heaps smarter than last time
User avatar
englishstiv
paso grand pooh-bah
Posts: 1111
Joined: Wed Apr 09, 2008 9:57 pm
model: 907 I.E.
year: 1992
Location: Manchester, England.

Re: 907ie Choke lever WANTED

Post by englishstiv »

Yeh I tried some Fibre glass resin and it still cracked open. Its actually split just above the knuckle part that you put your thumb on to open the choke, Even though its not much pressure the movement is enough for it to drag the thing apart.

I tried Stein Dinse and they have it in stock but I'm a bit too tight for cash to splash as they trebled the price with postage, tax and as it's value is so low so I'm trying my local dealer when they are open next.
DUCATI 907ie 1992
HARLEY DAVIDSON ELECTRA GLIDE CLASSIC 1991
Mc tool
paso grand pooh-bah
Posts: 1875
Joined: Wed Dec 05, 2007 12:35 am
model: 906 Paso
year: 1990
Location: Newzealand

Re: 907ie Choke lever WANTED

Post by Mc tool »

Trouble is that if you dont grab it now ,when you do have to buy one it will be heaps more. Shoulda bought 2 . :lol:
I wish I was young again............Id be heaps smarter than last time
demidesmo
Posts: 16
Joined: Sun Jul 07, 2019 9:19 am
model: 907 I.E.
year: 1993
Location: Lancaster, UK

Re: 907ie Choke lever WANTED

Post by demidesmo »

I ended up buying one of these https://www.ebay.co.uk/itm/Ducati-ST4-9 ... SwZQRYghvg

ST4 choke lever assembly. I'd imagine the ST2 would be the same also.
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 907ie Choke lever WANTED

Post by HIGHWAY89 »

Pretty sure I can find one I took off mine as I went to keihin, if you still need one I may be able to help
HIGHWAY89
paso grand pooh-bah
Posts: 637
Joined: Sat Jul 16, 2016 6:35 am
model: 900 SS
year: 1989
Location: Australia

Re: 907ie Choke lever WANTED

Post by HIGHWAY89 »

Not sure if same but one for sale on ebay in oz from a seller called nomisetat
User avatar
higgy
paso grand pooh-bah
Posts: 3327
Joined: Tue Jul 29, 2008 9:50 pm
model: 907 I.E.
year: 1992
Location: Hilltown,Pennsylvania
Contact:

Re: 907ie Choke lever WANTED

Post by higgy »

https://www.ebay.com/itm/97-02-Ducati-M ... 3384664540


Looks like the one, may not be.Plenty around if it is
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
User avatar
englishstiv
paso grand pooh-bah
Posts: 1111
Joined: Wed Apr 09, 2008 9:57 pm
model: 907 I.E.
year: 1992
Location: Manchester, England.

Re: 907ie Choke lever WANTED

Post by englishstiv »

Thank you for all your help Folks I have purchased a replacement new Hot glue gun and it seems to of done the job …. well at least for the time being not sure if its the same part but found this in my searches recently looks very similar and from a 92 model ???

https://www.ebay.co.uk/itm/CAGIVA-PRIMA ... 2610117626
DUCATI 907ie 1992
HARLEY DAVIDSON ELECTRA GLIDE CLASSIC 1991
Post Reply