Regulator/Rectifier replacement

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
Alfaman
Posts: 6
Joined: Fri Apr 12, 2019 1:45 pm
model: 750 Paso
year: 1988
Location: USA

Regulator/Rectifier replacement

Post by Alfaman »

Hi All-

I recently purchased a new regulator/rectifier from Electrosport (ESR515) to replace the OEM unit on my '88 Paso. I am theorizing that the dash light bulbs, tail light bulbs and the fuel pump have all burned because the bike was overcharging (roughly 16-16.5V). The problem is that while I thought the new unit would be plug and play- when I went to replace old with new, I discovered the connectors are different. The old unit uses molex type connectors whereas the new unit uses standard pin/pigtail connectors. There were no install instructions included with the new regulator and the color coding of the wires doesn't mach. I sent a note to electrosport and they weren't much help.

Has anyone done this recently and if so, which wires correspond to which?

Thanks for the help.
User avatar
paso750
paso grand pooh-bah
Posts: 5505
Joined: Sun Jul 18, 2004 12:00 am
model: 750 Paso
year: 1987
Location: southern Germany

Re: Regulator/Rectifier replacement

Post by paso750 »

Hi,

have a look at the download topic on top of this forum. Also have a look at the 906 FAQs.

G.
Post Reply