Page 1 of 1
‘New’ forum member
Posted: Sun Jan 31, 2021 3:33 pm
by BARONROJO
Hi all,
I’m the owner of a 1988 750 Paso from 2002 and registered to this forum from 2010. Although I’ve been working as a civil engineer for two decaes, I settled my own Ducati specialist workshop in 2016.
In all these years, along with the Paso, I’ve become the owner of 4 more Ducatis: a MTS 1000 I bought new in 2004, an 851 ‘91 I bought in 2012 and later converted in a 851 Réplica powered by a 996 SPS engine and Monster S4R electrics/electronics, a 1986 F1 I bought in 2007 and my most recent, a Monster 695 intended for my customers’ use.
After long years sitting uner a cover in my garage, I’ve decided to recomission my completely original (except for the exhaust cans) Paso, fitting a set of Mikunis from a donor M750.
I’ll keep you informed of my progress!
Re: ‘New’ forum member
Posted: Mon Feb 01, 2021 1:57 pm
by randtcastell
Welcome home! We look forward to photos of yer bikes. :^)
Re: ‘New’ forum member
Posted: Mon Feb 01, 2021 9:52 pm
by Tamburinifan
Welcome!
Nice stable.
Re: ‘New’ forum member
Posted: Thu Feb 04, 2021 8:14 pm
by BARONROJO
This is my 851 SP3 Réplica / 996 SPS hybrid bike built by myself from the con-rod bearings up... (sitting at my workshop)
My good-old all-rounder MTS 1000...
My cool F1 (on the right)
And... for not I haven’t any picture of the Paso or the min-monster (at the painter’s)
Re: ‘New’ forum member
Posted: Fri Feb 05, 2021 4:10 pm
by randtcastell
Hermoso!!
Re: ‘New’ forum member
Posted: Tue Feb 09, 2021 5:12 pm
by BARONROJO
And the Paso undergoing resurrection works....
She's been started today after about 8-10 years. Just one cylinder working due to the Mikunis having been found not as clean as I supposed I bought then, but nothing that a deep cleaning -in process- can't solve. So, next steps will be easy!
Re: ‘New’ forum member
Posted: Wed Feb 10, 2021 4:13 pm
by paso750
would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks.
G.
Re: ‘New’ forum member
Posted: Wed Feb 10, 2021 9:05 pm
by Frank.61
Wow, and I thought I had a nice man cave annex workshop!
Love the coffee table, if I was a little younger I would follow suit.
Is that a private workshop? Impressed.
Love your 851 ..... good luck with the Paso and let the pictures keep comming!
Buena suerte!
Frank
Re: ‘New’ forum member
Posted: Thu Feb 11, 2021 11:21 am
by Derek
paso750 wrote:would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks.
G.
Be nicer if it was in focus too.
Re: ‘New’ forum member
Posted: Thu Feb 11, 2021 5:22 pm
by BARONROJO
paso750 wrote:would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks.
G.
Sorry! Some forum reshape pics, others don't! I'll be more careful next time!
Aaanndddd!!!!
ALIVE!!! (facebook video)
Re: ‘New’ forum member
Posted: Thu Feb 11, 2021 5:25 pm
by BARONROJO
Frank.61 wrote:Wow, and I thought I had a nice man cave annex workshop!
Love the coffee table, if I was a little younger I would follow suit.
Is that a private workshop? Impressed.
Love your 851 ..... good luck with the Paso and let the pictures keep comming!
Buena suerte!
Frank
I do bikes now for living so, unfortunately, I have to deal with customers!