‘New’ forum member
‘New’ forum member
Hi all,
I’m the owner of a 1988 750 Paso from 2002 and registered to this forum from 2010. Although I’ve been working as a civil engineer for two decaes, I settled my own Ducati specialist workshop in 2016.
In all these years, along with the Paso, I’ve become the owner of 4 more Ducatis: a MTS 1000 I bought new in 2004, an 851 ‘91 I bought in 2012 and later converted in a 851 Réplica powered by a 996 SPS engine and Monster S4R electrics/electronics, a 1986 F1 I bought in 2007 and my most recent, a Monster 695 intended for my customers’ use.
After long years sitting uner a cover in my garage, I’ve decided to recomission my completely original (except for the exhaust cans) Paso, fitting a set of Mikunis from a donor M750.
I’ll keep you informed of my progress!
I’m the owner of a 1988 750 Paso from 2002 and registered to this forum from 2010. Although I’ve been working as a civil engineer for two decaes, I settled my own Ducati specialist workshop in 2016.
In all these years, along with the Paso, I’ve become the owner of 4 more Ducatis: a MTS 1000 I bought new in 2004, an 851 ‘91 I bought in 2012 and later converted in a 851 Réplica powered by a 996 SPS engine and Monster S4R electrics/electronics, a 1986 F1 I bought in 2007 and my most recent, a Monster 695 intended for my customers’ use.
After long years sitting uner a cover in my garage, I’ve decided to recomission my completely original (except for the exhaust cans) Paso, fitting a set of Mikunis from a donor M750.
I’ll keep you informed of my progress!
- randtcastell
- Posts: 356
- Joined: Fri Nov 13, 2009 4:33 pm
- model: 750 Paso
- year: 1987
- Location: San Francisco Bay, California USA
- Contact:
Re: ‘New’ forum member
Welcome home! We look forward to photos of yer bikes. :^)
1987 Ducati P750
1973 Honda CB450
2022 KTM RC390
1973 Honda CB450
2022 KTM RC390
-
- paso grand pooh-bah
- Posts: 1527
- Joined: Thu Jun 21, 2007 12:00 am
- model: 907 I.E.
- year: 1991
- Location: Gothenburg, SWEDEN
Re: ‘New’ forum member
This is my 851 SP3 Réplica / 996 SPS hybrid bike built by myself from the con-rod bearings up... (sitting at my workshop)
My good-old all-rounder MTS 1000...
My cool F1 (on the right)
And... for not I haven’t any picture of the Paso or the min-monster (at the painter’s)
My good-old all-rounder MTS 1000...
My cool F1 (on the right)
And... for not I haven’t any picture of the Paso or the min-monster (at the painter’s)
- randtcastell
- Posts: 356
- Joined: Fri Nov 13, 2009 4:33 pm
- model: 750 Paso
- year: 1987
- Location: San Francisco Bay, California USA
- Contact:
Re: ‘New’ forum member
And the Paso undergoing resurrection works....
She's been started today after about 8-10 years. Just one cylinder working due to the Mikunis having been found not as clean as I supposed I bought then, but nothing that a deep cleaning -in process- can't solve. So, next steps will be easy!
She's been started today after about 8-10 years. Just one cylinder working due to the Mikunis having been found not as clean as I supposed I bought then, but nothing that a deep cleaning -in process- can't solve. So, next steps will be easy!
- paso750
- paso grand pooh-bah
- Posts: 5558
- Joined: Sun Jul 18, 2004 12:00 am
- model: 750 Paso
- year: 1987
- Location: southern Germany
Re: ‘New’ forum member
would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks.
G.
G.
Re: ‘New’ forum member
Wow, and I thought I had a nice man cave annex workshop!
Love the coffee table, if I was a little younger I would follow suit.
Is that a private workshop? Impressed.
Love your 851 ..... good luck with the Paso and let the pictures keep comming!
Buena suerte!
Frank
Love the coffee table, if I was a little younger I would follow suit.
Is that a private workshop? Impressed.
Love your 851 ..... good luck with the Paso and let the pictures keep comming!
Buena suerte!
Frank
Bimota SB4-S - 1984
Ducati Paso 750 - 1989
Suzuki SV1000S - 2008
Ducati Monster 796 abs - 2010
Ducati Paso 750 - 1989
Suzuki SV1000S - 2008
Ducati Monster 796 abs - 2010
- Derek
- paso grand pooh-bah
- Posts: 768
- Joined: Thu Nov 03, 2011 10:13 am
- model: 907 I.E.
- year: 1994
- Location: Scotland
Re: ‘New’ forum member
Be nicer if it was in focus too.paso750 wrote:would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks.
G.
1994 907ie
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)
Scotland
2017 Supersport 939
2015 Scrambler Classic
1982 Pantah 500SL (now sold)
Scotland
Re: ‘New’ forum member
Sorry! Some forum reshape pics, others don't! I'll be more careful next time!paso750 wrote:would you please post future pictures in a smaller resolution? They are way too big if you can't even see them fully on a 24" monitor. Thanks.
G.
Aaanndddd!!!!
ALIVE!!! (facebook video)
Re: ‘New’ forum member
I do bikes now for living so, unfortunately, I have to deal with customers!Frank.61 wrote:Wow, and I thought I had a nice man cave annex workshop!
Love the coffee table, if I was a little younger I would follow suit.
Is that a private workshop? Impressed.
Love your 851 ..... good luck with the Paso and let the pictures keep comming!
Buena suerte!
Frank