Ignition pickups ?

discussions specific to the 750 Paso

Moderators: paso750, jcslocum

Post Reply
Stepaso
Posts: 14
Joined: Sun Dec 29, 2019 11:30 pm
model: 750 Paso
year: 1988
Location: New Zealand

Ignition pickups ?

Post by Stepaso »

My 1988 White Limited Paso #754059 started running on one cylinder the other day, on the way back from a 40klm ride to get an ice cream through classic North Auckland back country twisty bush clad roads with no-one else on them ... every time I stopped the motor would cool down and it would go again on 2 cylinders.
limping home and after tracing no spark on the horizontal cylinder I found one of the pickups had gone open circuit, the other was 95ohm.
The bike is ex America so has Kokusan Densi ignition electrics, After lots of research I find I can get a new set for about $500 NZ$ but there is discussion on this board where people have used the pickup from a Fiat Uno, the only other info is they cost $19.

Can anyone offer any leads to reasonably priced parts or the part number of the Fiat Uno pickup ?
Ducati OE# 260.1.001.1A 26010011A

Regards Stephen

1988 Paso 750 White Ltd
1982 S2
angelix
Posts: 338
Joined: Thu Nov 29, 2007 2:38 am
model: 907 I.E.
year: 1990
Location: UK

Re: Ignition pickups ?

Post by angelix »

IGnitech in Czech republic sells an alternative replacement , however in NZ there is LIAM VENTER at Fast Bike GEAR (NZ!!) he has the replacement in stock for 49NZ$...

http://www.fastbikegear.co.nz/index.php ... ts_id=6792

he is also developer and importer for IGNITECH, he might be able to help you with a full set up with hall sensors instead of the traditional pickups. He has a kit for the 900 , but i think the same can or could be adapted to the 750, really worth giving him a call.

your pickups... would just be the pickups wiring going bad, it tends to crack so it could be something simple to fix, but I would go all the way and either replace them with new ones available through IGNITECH or FASTBIKE GEAR
User avatar
higgy
paso grand pooh-bah
Posts: 3263
Joined: Tue Jul 29, 2008 9:50 pm
model: 906 Paso
year: 1990
Location: Hilltown,Pennsylvania
Contact:

Re: Ignition pickups ?

Post by higgy »

For the more adventurous among us:

https://speeduino.com/home/

https://www.facebook.com/HandHeldDyno/ ---) these guys have interesting conversations but seem to be perpetually sold out or in production and almost all they do is much cheaper some where else
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
If it ain't broke keep fixin it till it is
88 750
90 906
92 907ie
Post Reply