Plug identification?

discussions specific to the 907IE
Post Reply
Crumpati
Posts: 43
Joined: Mon Nov 28, 2011 8:50 am
model: 907 I.E.
year: 1993
Location: idsvold QLD Australia

Plug identification?

Post by Crumpati »

Hi there, can anyone tell me what the two plugs are that along the top frame rail on the lefthand side? Two identical with the C shaped spring clip joining them. One seems to go into the housing near the clutch slave. I think they are both labeled "Conne Commando" In the parts diagram, thanks
nickta
Posts: 295
Joined: Tue Jul 24, 2012 8:54 am
model: 907 I.E.
year: 1992
Location: Cairns, Queensland, Australia

Re: Plug identification?

Post by nickta »

Inductive pickups for the Ignition possibly? The wiring (2 wires in each) that goes into the loom will have an orange and grey/black wire in one and violet/black and yellow/blue in the other. Labelled 33 and 34 in the wiring diagram.

Don't mix them up. Engine won't run or run really badly if it does start. There is a post on the forum about this somewhere...

Cheers.
Nick.
Post Reply