Page 1 of 1

In need of a Weber

Posted: Sun Dec 12, 2021 9:27 pm
by Lionel
Hi all
I know this is probably against most peoples idea But I had the Webber working grate. I don't like the Delorto's and prefer to have the bike more original.
I have just re-purchased my 750 Limited
I'm trying to bring it back to the bike is was.
The weber has been removed and discarded by previous owner.
So Please if anyone has one that would part with please let me know.

Regards from Aus

Re: In need of a Weber

Posted: Wed Dec 15, 2021 9:42 am
by Andrew2
Where are you located?.

Re: In need of a Weber

Posted: Wed Dec 15, 2021 11:14 pm
by Lionel
Andrew
Wollongong NSW Australia

Re: In need of a Weber

Posted: Fri Dec 31, 2021 10:59 pm
by Dave73
Hi Lionel,

I've got one in a box of spares that came with my 750 Sport. Weber will be hardly used as it got swapped to Mikunis.
In Brisbane, Qld. We can discuss via PM.

Cheers Dave

Re: In need of a Weber

Posted: Mon Jan 10, 2022 10:11 pm
by Lionel
Dave73 I will message U

Re: In need of a Weber

Posted: Wed Feb 02, 2022 8:16 pm
by Lionel
Hi Dave73

Been trying to contact U all the private messages I've sent seem to just stay in my out box.
U can contact me at lionel.burns@transport.nsw.gov.au

Re: In need of a Weber

Posted: Thu Feb 03, 2022 8:40 am
by paso750
if messages are in the out box it means they were sent but not read yet

Re: In need of a Weber

Posted: Sat Feb 05, 2022 2:45 am
by Lionel
OK thanks

Re: In need of a Weber

Posted: Mon Feb 07, 2022 8:10 pm
by Dave73
Lionel, sorry I missed this. Notifications must have been going in my junk folder. Have sms and will send you an email.
Cheers Dave

Re: In need of a Weber

Posted: Wed Jun 15, 2022 4:23 am
by Lionel
Got the weber from a 88 750 sport off dave73 thanks heaps. Removed the Delorto's and fitted the weber with great improvements in performance and starting
tried adding video not working

Re: In need of a Weber

Posted: Thu Jun 16, 2022 2:14 pm
by murphus
What's your starting procedure? I put the Weber back on my '88 Limited. It had Mikuni flat slides, which worked pretty much flawlessly, but like you I wanted originality. It runs beautifully, but first start requires 3 good pulls on the throttle to squirt some fuel into the intake and full choke, and even then it's not exactly a clean start, acting like it's really lean. Thirty seconds to a minute later it's running perfectly.

Re: In need of a Weber

Posted: Wed Jun 29, 2022 4:21 am
by Lionel
two twists then just button no choke let idol for a few minutes