Loss of strokes

discussions specific to the 907IE
Post Reply
User avatar
persempre907
paso grand pooh-bah
Posts: 3312
Joined: Tue Dec 06, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Roma, Italia

Loss of strokes

Post by persempre907 »

Hi everybody,
my 907, when the motor is hot, sometime loss a stroke, at steady fast, and only about 3000 RPM.
Someone can tell me why :confused: ?
Ciao.
Francesco
User avatar
DesmoDog
Posts: 244
Joined: Sun Feb 27, 2005 12:00 am
model: 907 I.E.
year: 1991
Location: Dexter, MI USA
Contact:

Post by DesmoDog »

Is the battery in good shape? When you start the enigne, does it turn over easily or does the battery seem to struggle a little to get it to spin?

My 907 had the same problem, turned out the battery was on it's way out. New battery solved it.
-Craig
User avatar
persempre907
paso grand pooh-bah
Posts: 3312
Joined: Tue Dec 06, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Roma, Italia

Post by persempre907 »

The battery should be in great shape because I have changed it 1 month ago!
But therefore the battery seem to struggle a little to get it to spin!
Have I to charge it?
Ciao.
Francesco
User avatar
DesmoDog
Posts: 244
Joined: Sun Feb 27, 2005 12:00 am
model: 907 I.E.
year: 1991
Location: Dexter, MI USA
Contact:

Post by DesmoDog »

Most batteries should be charged before use... but I think a long ride should be enough to charge it? So... it couldn't hurt but I wouldn't count on it fixing it.
-Craig
User avatar
Skins
paso grand pooh-bah
Posts: 1304
Joined: Tue Oct 26, 2004 12:00 am
model: 750 Paso
year: 1988
Location: Kapiti, New Zealand

Post by Skins »

:cool:

The battery should show a charge reading of 12.5 volts. If the reading is over 12 volts and the starter still does not spin quickly, then you have other problems, perhaps in the wiring. In that case, you should check and clean all the contacts in the wiring.
User avatar
persempre907
paso grand pooh-bah
Posts: 3312
Joined: Tue Dec 06, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Roma, Italia

Post by persempre907 »

It's so!
I will clean all the contacs.
But you think that it can make loss the strokes?
Ciao
Francesco
User avatar
Skins
paso grand pooh-bah
Posts: 1304
Joined: Tue Oct 26, 2004 12:00 am
model: 750 Paso
year: 1988
Location: Kapiti, New Zealand

Post by Skins »

:cool:

I think it is possible, but cleaning the contacts may help the starting, in any case.
User avatar
Paul
Posts: 187
Joined: Fri Jul 16, 2004 12:00 am
model: 750 Paso
year: 1987
Location: Hartbeespoort Dam, South Africa

Post by Paul »

Francesco,

If the battery contacts are really dirty / corroded they can reduce the available power to the point where it can just bring the solonoid in and barely turn the motor over. Make sure the contacts are clean and the terminals are tight.

Good luck.

Paul
User avatar
persempre907
paso grand pooh-bah
Posts: 3312
Joined: Tue Dec 06, 2005 12:00 am
model: 907 I.E.
year: 1992
Location: Roma, Italia

Post by persempre907 »

Really, only after 1 month that I've changed the battery his contacs seems corroded. It seems strange to me.
Thanx.
Francesco
Post Reply