Page 1 of 1

Shindengen SH847 regulator

Posted: Wed Sep 07, 2022 12:30 pm
by Willo
Wondering if anybody has installed a Shindengen SH847 regulator. It's much bigger than the OEM unit. If so where did you install it on the bike. A rough look suggests there isn't enough room in the oem position.

Thanks in advance.

Re: Shindengen SH847 regulator

Posted: Sun Sep 18, 2022 11:20 pm
by h1a
Not exact same regulator but had same problem, put mine under left rear sidcover close to the battery.

Re: Shindengen SH847 regulator

Posted: Mon Sep 26, 2022 1:05 pm
by Willo
Thanks h1a,
Thats a logical spot and my thinking is I will do the same. Where did you run the stator wires?

Re: Shindengen SH847 regulator

Posted: Mon Sep 26, 2022 6:08 pm
by h1a
41E599D5-0E30-4298-8DE9-F6FD90BBE041.jpeg
41E599D5-0E30-4298-8DE9-F6FD90BBE041.jpeg (112.37 KiB) Viewed 6289 times
Hi.
Sorry, it is years ago so i dont remember exactly but i belive it was along the frame rails.
Found a picture with the new placement of the regulator but dont remember how to post it on the board :roll:

Edit, found out how to attach pic
Image :mrgreen:

Re: Shindengen SH847 regulator

Posted: Fri Sep 30, 2022 3:30 am
by Willo
h1a, Many thanks.