Never ending story, WEBER

nilaus · Post by **nilaus** » Thu Jan 26, 2006 10:34 am

Hi guys,

I need to re jet my PASO 750. Where in Europe is it possible to get jets for the weber 44 dcnf?

Regards
Klaus
PASO 750, 1990

Finnpaso · Post by **Finnpaso** » Thu Jan 26, 2006 4:32 pm

Hi!

Try to get contact to local carburator maintainers, so they know better, who maybe have them laying in some boxes. That way i managed to find 5 years ago to my Weber some new jets. And i bought then all jets, what they had cheaply

Already that time they say, that difficult find those parts anymore from normal way, cause that carburator time is over and all cars and bikes start to be injected. Maybe U can find Weber/Marelli importer to Danmark if search from net?

Also those injection maintainers can know way/place....

persempre907 · Post by **persempre907** » Thu Jan 26, 2006 7:50 pm

Hi Nil,
you could try also between the sellers of FIAT/LANCIA spare parts, since the same Weber carburettor was mounted also on many '80/'90 FIAT cars.
Good luck.
Francesco

jfiore · Post by **jfiore** » Mon Jan 30, 2006 9:17 pm

It's not quite Europe, but you could try http://www.carburettorspecialists.com - they are somewhere in the UK, and claim to have quite a large stock of Weber parts including all of the jets (and other parts) used by the DCNF model.

Never ending story, WEBER

Never ending story, WEBER

Weber Parts