Paso 750 forks height

Hifimoto · Post by **Hifimoto** » Thu Aug 31, 2023 8:32 pm

I'm looking for a base setting for fork height for Paso 750. There is no info in the workshop manual regarding that. Mine came with the top of the fork leg (metal tube) just aligned with the top of triple clamp. Cap of the fork leg is just above. It can go up for about 5 mm before hits handlebar casting.

Thanks for any info!

: PasoClamp1.jpg (143.86 KiB) Viewed 8576 times

: PasoClamp2.jpg (163.83 KiB) Viewed 8576 times

murphus · Post by **murphus** » Thu Sep 14, 2023 2:14 am

My 1988 Paso is set up as per your first photo; fork leg aligned with top of triple clamp.

Hifimoto · Post by **Hifimoto** » Tue Sep 19, 2023 6:31 am

Murphus,

many thanks!!!

Paso 750 forks height

Paso 750 forks height

Re: Paso 750 forks height

Re: Paso 750 forks height