ducatipaso.org

Posted: **Thu Aug 31, 2023 8:32 pm**

I'm looking for a base setting for fork height for Paso 750. There is no info in the workshop manual regarding that. Mine came with the top of the fork leg (metal tube) just aligned with the top of triple clamp. Cap of the fork leg is just above. It can go up for about 5 mm before hits handlebar casting.

Thanks for any info!

: PasoClamp1.jpg (143.86 KiB) Viewed 6355 times

: PasoClamp2.jpg (163.83 KiB) Viewed 6355 times

Posted: **Thu Sep 14, 2023 2:14 am**

My 1988 Paso is set up as per your first photo; fork leg aligned with top of triple clamp.

Posted: **Tue Sep 19, 2023 6:31 am**

Murphus,

many thanks!!!

ducatipaso.org

Paso 750 forks height

Paso 750 forks height

Re: Paso 750 forks height

Re: Paso 750 forks height