Brocken float pin support quick fix.
Brocken float pin support quick fix.
The Paso 906 . The Webber carburettor. Brocken the float pin brace. What the F. The peice fell to the bench. How the hell am I going to fix this.welding is out of the question. Glueing will never work. I treated it like a Brocken arm, wrapped the Brocken peice in fine copper wire until in was completely wrapped up to the pin, then soldered the copper wire ring until it formed a cast around the Brocken post. Worked like a charm.
- Witzie
- Posts: 44
- Joined: Wed May 25, 2011 9:17 am
- model: 906 Paso
- year: 1989
- Location: Friesland, the Netherlands
Re: Brocken float pin support quick fix.
that sounds like a good fix!
Kawasaki 250 Mach1 1977, Honda CB125T 1978, Kawasaki Z400J 1981,
Kawasaki Z700 1987, Kawasaki ZL1000 1990, Ducati PASO 750 1990, Ducati 900ss 1994, Kawasaki ZZR1100 1993, Ducati Paso 906 1989
Kawasaki Z700 1987, Kawasaki ZL1000 1990, Ducati PASO 750 1990, Ducati 900ss 1994, Kawasaki ZZR1100 1993, Ducati Paso 906 1989
- higgy
- paso grand pooh-bah
- Posts: 3350
- Joined: Tue Jul 29, 2008 9:50 pm
- model: 907 I.E.
- year: 1992
- Location: Hilltown,Pennsylvania
- Contact:
Re: Brocken float pin support quick fix.
alumalloy most likely would work as well
Ducati,making mechanics out of riders since 1946
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires
88 750
90 906
92 907ie
There's no problem so bad that a little fixing can't make it worse! : )
Electrocuted Birds Are Bursting Into Flames and Starting Wildfires

88 750
90 906
92 907ie