Page 1 of 1
Corbin seat on a 907
Posted: Fri Feb 03, 2006 5:39 pm
by beemerboy
I received some inquiries as to how a black & red Corbin seat looks on a black 907. Well, here ya go:
Posted: Fri Feb 03, 2006 7:06 pm
by Rogero
[/url]
This is what a Red 907 looks like with a black Corbin seat on.
Roger
Corbin seat
Posted: Mon Feb 06, 2006 9:10 pm
by beemerboy
Oh, I see that you have one of those "pedestrian" red 907's. :laugh:
Posted: Tue Feb 07, 2006 4:20 am
by Stingray230SX
Me likey those carbonfiber cans
doug
Posted: Tue Feb 07, 2006 7:08 pm
by Rogero
Bit loud for the annual MOT test but got a certificate so I'm ok!
The cans are ANR Performance pipes from the UK. Sounds like a MOTO GP bike and the neighbours hate it!
The seats are excellent.
Posted: Tue Feb 07, 2006 9:34 pm
by Stingray230SX
YES i know about the loud pipes ,while mine are the stock cans on the outside the P.O. cored them out and removed the aluminum trim and wrapped them in stainless(if he had only jet hot coated the rest of the pipes/system it would be fine)however he used some kina paint that is slowly bubbling off and is a not so hot looking grey color anyway.
been wanting some carbon cans but money is tight right now(plus its hard to drop 700.00+
on a set of cans when i have right about 2500.00 in the whole bike)and it runs most excellent anyways!!!
doug
Posted: Fri Feb 10, 2006 6:29 pm
by Rogero
I wouldn't change cans unless I had to, there is better things to spend cash on. But when you do change them make sure you get a set that you'll enjoy. Daft as it seems polishing a pair of carbon cans brings a smile to my face....
Must dash I think I need a beer :laugh:
Posted: Fri Feb 10, 2006 6:36 pm
by Finnpaso
Remember to "remap" Your ECU also, if change to open pipes!
Posted: Sat Feb 11, 2006 12:50 pm
by Rogero
Top tip Antti for those not aware.
Mine is chipped specially for the pipes so valves etc won't get burnt out
Posted: Sat Feb 11, 2006 2:08 pm
by Finnpaso
Good, Rogero!
I am virgin, so i need to take care of all Paso-owners all around world! :funny: :funny: Btw, i have also chipped my 907IE. FIM chip, FIM AMB and surely tuned with flat top FIM software. Need 7.4% richer mixture with ported heads, ST2 Cams, K & N and open Contis. But now function VERY well !!!
Posted: Sat Feb 11, 2006 6:25 pm
by Rogero
Indeed - sounds good.
Cold in the UK today but very dry and I went for a blast today after full service and MOT last week. Marvellous stuff. Paso's turn heads more than most other bikes I know.
Roll on the spring
Posted: Sat Feb 11, 2006 7:23 pm
by Finnpaso
....especially Women heads !!!! :laugh:
Re: Corbin seat on a 907
Posted: Fri Sep 07, 2012 6:07 pm
by Rogero
This thread is appropriate as I am in correspondence with keith about my seat!
Rogero
Re: Corbin seat on a 907
Posted: Sat Sep 08, 2012 1:44 pm
by 900streetfighter
Looks good on your bike Roger. Hope its comfortable. Style over function wins for me anyway.
I have a Corbin on my streetfightered SSie, weighs a ton and no more comfortable than original but looks great.