Aftermarket Exhaust - 750 vs. 907

jfiore · Post by **jfiore** » Thu Apr 06, 2006 3:54 pm

Pardon my ignorance, but does anyone know if slip-on exhausts that are designed for the 907ie will fit the 750 Paso? I am not sure of the header diameter of the 907, or if there are any exhaust or body geometry differences that would affect fit.

Two Brothers lists slip-on exhausts for the 907 in aluminum, carbon and titanium - it would be nice if they fit the Paso!

Finnpaso · Post by **Finnpaso** » Thu Apr 06, 2006 4:31 pm

First check, what is YOUR 750 Pasos headers diameter!!!! ????? All 907 have same, but there are at least 2 differend 750 Paso headers, so check that first.... If You have same, as in 907, then quite easy to solve problems, but if U have those "california"or USA small headers in Your Paso, then U have problems to find new cannisters

jfiore · Post by **jfiore** » Mon Apr 10, 2006 4:25 pm

OK, I measured my Paso's headers, and they are 40mm in diameter. Are the headers of the 907 also 40mm?

Thanks for any info that anyone can provide!

Finnpaso · Post by **Finnpaso** » Mon Apr 10, 2006 6:03 pm

Yes, they are 40mm also in 907IE! So, You can put near all mufflers, what You can find to 907IE. I have noticed small dimension differences between my 750Paso and my 907IE:s frames, so i cant quarantee 100% fitments, but i havent had big problems to change mufflers from 907 to 750 Paso and via versa.... Btw, many USA modell 750 Pasos have smaler diameter headers.....and also smaler holes in mufflers ends.

jfiore · Post by **jfiore** » Tue Apr 11, 2006 1:09 am

Thanks, Antti!

When I get the TwoBros exhaust installed, I will post info on how they fit and sound (and pictures, of course!)

Finnpaso · Post by **Finnpaso** » Tue Apr 11, 2006 6:37 pm

Very Good!

Rodney · Post by **Rodney** » Tue Apr 18, 2006 8:04 am

the headers are approx 36 mm but after the crossover they go to 40mm pipes thats what mine do . just in the process of changing mine to 40mm all they way through as i have a set if contis i want to fit.

Finnpaso · Post by **Finnpaso** » Tue Apr 18, 2006 8:19 pm

JUST that is BEST way to go!!! 40mm headers with Contis

BEST ever sound in Ducati!

Duc750 · Post by **Duc750** » Wed Apr 19, 2006 8:47 am

Any one ever used Lanfranconi's?

I have a very nice pair sitting in my loft at the minute wghich I may get around to fitting this year

(I seem to collect Paso exhausts !)

Finnpaso · Post by **Finnpaso** » Wed Apr 19, 2006 7:43 pm

I collect them also.. now about 7 pairs to my Pasos

:funny:

Duc750 · Post by **Duc750** » Thu Apr 20, 2006 11:47 am

You beat me then

I only have four pairs currently :neener:

Just seem to go for them whenever they appear on Ebay and end at silly times of the day !

Rodney · Post by **Rodney** » Fri Apr 21, 2006 9:08 am

got the contis on , sounds fantastic much louder than the staintunes i had on it . now i can get the staintune fixed that the bike landed on when it fell of its sidestand.

Jacob · Post by **Jacob** » Tue Apr 25, 2006 10:26 pm

Finnpaso wrote:I collect them also.. now about 7 pairs to my Pasos :funny:

Hi Finnpaso,
Do you so many so you are interested in selling a pair ?
Im living in Denmark and have just bought a Paso 750 from UK.
But they are very loud - that I can not have the bike registered in Denmark - not before I have new silencers.
I come to Helsinki several times a year - do you live in that erea ?
Kind regards,
Jacob

fasterdammit · Post by **fasterdammit** » Wed Apr 26, 2006 2:26 pm

+1 on that ... I'm still running the stock Silentiums and would like to find a nice pair of after markets, myself. So if any of you hoarders ever decide to sell of a pair or two, let me know!

Duc750 · Post by **Duc750** » Wed Apr 26, 2006 2:48 pm

Jacob

If you have it type approved in the uk would that help prior to export would that help or does it have to be tested in Denmark ?

Aftermarket Exhaust - 750 vs. 907

Aftermarket Exhaust - 750 vs. 907

Exhaust Headers - 907 vs. 750

Exhaust - 907 vs. 750