Well I got the new F1S yesterday and they fit like a champ. No modifications needed at all. Sure quieted things down a bit.

The pump kit is Part #: FP-576KIT

It is the last pump on the first page. I bought the strainer and a fuel pressure regulator from them, and they were exact replacement for the 907ie.

I was going to by mine here, but bought one from NAPA instead, but wish I would have gotten this one instead. The NAPA works, but when all was said and done, I really didn't save any money and spent a lot of time . I did by the strainer from Euro Moto though. http://www.euromotoelectrics.com/Bosch_O...

I used the Honda CBR coolant neck and the tank from a Kawasaki 250 Ninja. I did this almost a year ago and have not had a problem. Kawasaki tank is almost a direct replacement and fits great in the same place as the original Ducati tank. Got the tank on ebay for $7.00 new and the coolant neck and ca...

Will slip on pipes for a 906 fit a 907? Curious if the inside diameter is the same. I would presume the hangers would be the same.

I didn't take pictures, but it was a very simple install. The ballast assy. mounts to the voltage reg plate directly next to the regulator. There is 3 prong adaptor that plugs into the existing headlight bulb plug. The low beam is hid, high beam is halogen. Low beam is more than adiquate for riding ...

I put in the light weight basket and clutch plate today. Made the motor sound different, I guess due to the 2.5 lb. reduction on the crank. Still have some jingle, and I'm sure it will increase with time. I also put in a hi-lo hid lampset in the stock headlight. Major improvement over the old h-4 bu...

I'm not opposed to the clutch jingle, but it has gone from sounding nice to obnoxious. I thinks this weekend I'll see if there is any dust in it. I do have a vented cover on it and have always like the noise the clutch makes, as that is one of the things that makes it a Duc. Does anyone know for sur...

My clutch on the 907 is getting a little louder these days. i read up on Barnet kevlar clutches. Anyone tried them? and should I also replace the clutch basket.

Still trying to determine if I need 3 or 4 ohm coils for my 907. I was going to purchase Dynas Any help is appreciated
Preston

Dan, I met you in Luckenbach at Harvest Gold, 907 IE,. Did you get your asking price?
Preston

I tried to buy one from them about 6 months ago, and they were no longer available from them. I had to rewind my own at a friends motor shop.
Preston

I had stator and regulator problems a while back. It was necessary to rewind the stator and replace the regulator. With everything working well now, it produced 90 vac at 1500 rpm and 116 vac at 3000 rpm. Regulator output is 14.0 vdc. Mine had melted the yellow wires and smoked the regulator. I repl...

And a very merry Christmas from a not nearly as cold (+35f) central Texas. I will ride my 907 tomorrow.

Preston

Try JE Pistons. 92 mm bore ring set $27.00 US

Mine has the FIM 907 BPG2 Slip-On Mufflers chip in it. I presume it is for Staintune's Seems to be working fine with airbox modifications.