How do you manage to get the positioning right?

This one isn't off by much but there are wear marks on fairing panels due to it being off by a little bit.

I wondered if the two threaded bits on the underside were from the factory to locate the mount.

One of the header sets I have that I need to re-home has the double ring set. Anyone interested should PM me.

Love working on 30+ year old bikes! This winter I've been working to convert my Paso fairing to 1/4 turn fasteners. The well nuts offer some alignment flexibility and the new fasteners have less. There was always some weird panel fitment and the opening around the headlight never seemed right. Yeste...

Using the temporary wheel spacers I managed to get the wheels centered and the rear caliper carrier properly spaced. Sunny and cold so I did a quick loop around the neighborhood and all seems to work as it should. Steve at Bevel Heaven suggested getting small shims to fine tune the spacing. I ordere...

Just some traffic on the forum and to commiserate I offer up some pictures of my conversion from stock 16" wheels to a set of Akront/Marvic rims. A classic case of buying something complete is much cheaper than fixing up something in rough shape. I found the wheels on a Japanese auction site fo...

These are the stock 16" wheels for sale. I'm swapping in a set of 16" Akront/Marvic rims.

The rear comes with the cush drive.

Defects:
1/4' tear/puncture in the seat
Small wear of the cover as it wraps around seat pan.
One rivet has come out of the pan.

Pictures of the Corbin.

Every year it seems winter lands later and later in Boston. Wheel spacers are done and disks have arrived. Hopefully I can get it out for a spin before it all lands.

Best

I'm sorta wrapping up the current phase of work on my Paso and have some spare bits for sale. Shipping will be whatever it costs me from 02131. (Boston, MA. USA) At this point I have the following 2 US spec exhaust header assemblies $50 each OBO. A set of new EBC rotors, still in the box. $200 each....

Over the last few months I've been slowly working on quarter turn fasteners for the Paso. Here are a few pictures of the progress. Once I know the fitment is right I'll coat them in satin black. PXL_20230813_212735012.jpg PXL_20230813_212103871.jpg PXL_20230813_210309243.jpg PXL_20230813_210301159.j...

I'm looking for a set of hardware that mounts the exhaust can to the passenger foot rest.

Bolt and the washer/spacer etc. I have the rubber insert.

I'm in Boston.

Thanks

Ummm

Hard Pass

https://www.ebay.com/itm/335003728751?f ... SwtXFk6SOm


Not sure if those are RHD or LHD headlights. Maybe WaLee headlights

Just spotted this on ebay this morning if anyone is interested.

275826541952

Not my ad and I have no connection to the sale. Just thought someone might be interested.

Great to have options.

The seat lock blank arrived from Mark and fits.